Military Seals I Made For a Customer
-
- Posts: 34
- Joined: Tue Sep 12, 2017 9:47 pm
- Model of CNC Machine: Probotix Asteroid
Military Seals I Made For a Customer
I was commissioned a while back to make one of each of the military seals (minus the space force) for a customer. The last one is the Canada Tri-Service Badge. I have been sharing them as completed over on Facebook in a couple of groups I'm a part of. Now that they are all completed, I though I'd share them here for those who haven't had a chance to see them yet. Enjoy!
Rick Melendez
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Military Seals I Made For a Customer
Your painting skills are excellent!
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- jimandi5000
- Vectric Wizard
- Posts: 1054
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Military Seals I Made For a Customer
Very well done. Nice...
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Military Seals I Made For a Customer
Wonderful Craftsmanship on all!!
Beautiful paint jobs!
Congrats!
Beautiful paint jobs!
Congrats!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- scotttarnor
- Vectric Wizard
- Posts: 943
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Military Seals I Made For a Customer
Wow ! Very nice work! Could you share the dimensions?
Scott T
@scottscnc
@scottscnc
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Military Seals I Made For a Customer
Very, Very nice. Thank you for sharing.
-
- Posts: 34
- Joined: Tue Sep 12, 2017 9:47 pm
- Model of CNC Machine: Probotix Asteroid
-
- Posts: 34
- Joined: Tue Sep 12, 2017 9:47 pm
- Model of CNC Machine: Probotix Asteroid
Re: Military Seals I Made For a Customer
The rounds are 16.25" in diameter and 1.5" thick. The Canada badge is 16.5" tall and I wanna say around 12" wide. Same thickness.
Rick Melendez
- scotttarnor
- Vectric Wizard
- Posts: 943
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
Re: Military Seals I Made For a Customer
Wow larger than I was guessing!01f4irider wrote: ↑Thu Aug 26, 2021 12:27 amThe rounds are 16.25" in diameter and 1.5" thick. The Canada badge is 16.5" tall and I wanna say around 12" wide. Same thickness.
Your painting skills are unbelievable!
Scott T
@scottscnc
@scottscnc
-
- Vectric Craftsman
- Posts: 130
- Joined: Tue Feb 06, 2018 9:18 pm
- Model of CNC Machine: CNC 6040, Vectric Aspire, UCCNC
- Location: Skane, Sweden
Re: Military Seals I Made For a Customer
WOW, I am stunned. They are gorgeous.
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- jarm2
- Vectric Craftsman
- Posts: 246
- Joined: Wed Jun 13, 2012 9:16 pm
- Model of CNC Machine: C&CNC electronics 4x4 ext aluminum table
- Location: Harpster, Idaho
Re: Military Seals I Made For a Customer
Those are incredible. I wish I could paint any where as well as you.
I do the same set as well, but just in carved hardwoods about 8" diameter, and not painted. You are an excellent crafttsman. I have done the DevGru (Seals) emblem and Seabees as well. Any tips on how to paint these like you have done.
I do the same set as well, but just in carved hardwoods about 8" diameter, and not painted. You are an excellent crafttsman. I have done the DevGru (Seals) emblem and Seabees as well. Any tips on how to paint these like you have done.
Aspire 11 ViaCAD Pro 12 Corel 2019 W 10, 2.2 kw spindle wireless pendant
-
- Vectric Craftsman
- Posts: 213
- Joined: Sat Apr 01, 2017 4:39 pm
- Model of CNC Machine: laguna swift 4x4
- Location: Shawano Wisconsin
Re: Military Seals I Made For a Customer
I just wanted to thank you for sharing your beautiful
work on the forum. As a retired Army Veteran it was
nice to see this kind of work. I am sure it will be well
received by all who view.
Thank You Sir.
work on the forum. As a retired Army Veteran it was
nice to see this kind of work. I am sure it will be well
received by all who view.
Thank You Sir.
Re: Military Seals I Made For a Customer
Those are absolutely perfect. Was all of that done with a v-bit?