2021 User Group Meeting - San Diego

This is the place to post images of work produced using Aspire
MikeSibley
Posts: 22
Joined: Mon Jan 04, 2021 3:02 am
Model of CNC Machine: Avid Pro 4848
Location: Picayune, Mississippi

Re: 2021 User Group Meeting - San Diego

Post by MikeSibley »

Okay guys, I'm registered! Thanks for letting me know that attendance is limited, I'm all set and hope to meet everyone.

User avatar
gkas
Vectric Wizard
Posts: 1198
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: 2021 User Group Meeting - San Diego

Post by gkas »

MikeSibley wrote:
Sat Jan 16, 2021 3:10 pm
I stand corrected. Since I am new, I just didn't understand. For my professional conferences they are always revenue generating events for the organizers/hosts and they will always expand the event as the revenue increases because more attendees means more revenue. I didn't realize that there is a cap on this one. I will go ahead and register for safety sake.

Mike
From what I understand, we just max out the capacity of the venue. Vectric has to find places that hold the entire capacity at once for the lectures.

Tailmaker
Vectric Wizard
Posts: 422
Joined: Sun Jun 16, 2013 4:40 am
Model of CNC Machine: Home Built 4-axis Router
Location: Fort Collins, CO

Re: 2021 User Group Meeting - San Diego

Post by Tailmaker »

gkas wrote:
Sun Jan 17, 2021 12:37 am
From what I understand, we just max out the capacity of the venue. Vectric has to find places that hold the entire capacity at once for the lectures.
Technically hat would make business sense. But I would miss the smaller venue where people who have been just forum names can meet and chat. I don't think that is possible in a large "conference" environment. For that purpose (lectures) I am happy with the virtual meeting. While the smaller events can not accommodate everybody, they will surely attract the core users who commit early.
Download Puzzle, Finger Joint and Maze software at https://fabrikisto.com/tailmaker-software/

Stephanie Downing
Vectric Staff
Posts: 378
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2021 User Group Meeting - San Diego

Post by Stephanie Downing »

Hey everyone!

Happy New Year!

We're constantly monitoring the situation regarding our September User Group Meeting and we will certainly let you know in advance if there are any changes to our planned event.

At this time, we are remaining positive and keeping our fingers crossed that we'll able to see you all again later this year :)

Have a great day and stay safe :)

Thanks
Stephanie

User avatar
MarkL
Posts: 15
Joined: Sun Nov 30, 2014 9:35 am
Model of CNC Machine: Homebuilt Gatton CNC with rotary axis
Location: Southern Oregon, USA
Contact:

Re: 2021 User Group Meeting - San Diego

Post by MarkL »

I'm certainly looking forward to it. I was seriously disappointed that the 2020 meeting was cancelled.

Fingers crossed for 2021!
Double check, triple check, measure, measure, cut...

User avatar
scotttarnor
Vectric Wizard
Posts: 442
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: 2021 User Group Meeting - San Diego

Post by scotttarnor »

Registered and Hotel is booked ! Looking forward to this event!
Scott T

Stephanie Downing
Vectric Staff
Posts: 378
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: 2021 User Group Meeting - San Diego

Post by Stephanie Downing »

Fantastic news Scott T. It's great to have you on board :)

The countdown is on Mark Lindsay 8)

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4564
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: 2021 User Group Meeting - San Diego

Post by Rcnewcomb »

Make sure to verify your hotel reservation. I had cancelled my 2020 reservation but hadn't remembered to book for 2021 until today.

I'm all set now. Looking forward to September!
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

SteveNelson46
Vectric Wizard
Posts: 1184
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger/WinCNC
Location: Tucson, Az.

Re: 2021 User Group Meeting - San Diego

Post by SteveNelson46 »

Rcnewcomb wrote:
Wed Apr 07, 2021 6:32 pm
Make sure to verify your hotel reservation. I had cancelled my 2020 reservation but hadn't remembered to book for 2021 until today.

I'm all set now. Looking forward to September!
Me too, Randall. It will be nice to put faces on the names of fellow carvers.
Steve

User avatar
gkas
Vectric Wizard
Posts: 1198
Joined: Sun Jan 01, 2017 3:39 am
Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
Location: Southern California

Re: 2021 User Group Meeting - San Diego

Post by gkas »

Just got my updated room confirmation from DoubleTree today. It's getting closer.... 8) 8) 8)

Post Reply