Mantel

This is the place to post images of work produced using Aspire
Post Reply
paul1200
Posts: 2
Joined: Wed Sep 19, 2018 5:48 pm
Model of CNC Machine: Workbee & Self built 4X4 (heavy duty)
Location: Near JOG Highlands

Mantel

Post by paul1200 »

Thanks to Michael Tyler, made these out of pine to start as per Michaels design and was so impressed with the result I decided to make them as a two sided project out of oak. I then made the L frames creating the profiles using A two rail sweep, a good learning curve.
I then set about the mantel itself using a length of 4" x 1" oak using a similar two rail sweep I'm sure there must be a simpler way, I then constructed the shelf using oak veneered board for the top and bottom and wrapped the profiled piece around the front and sides. I am really pleased with the result, just need to finish the rest of the fire place now.

Paul :D
Attachments
IMG_4895.JPG
IMG_4896.JPG

User avatar
mtylerfl
Vectric Archimage
Posts: 5303
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Mantel

Post by mtylerfl »

Thank you, Paul! Your corbels and shelf in Oak look fabulous! Very clean carves!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Jan.vanderlinden
Vectric Wizard
Posts: 416
Joined: Wed Sep 28, 2016 10:19 pm
Model of CNC Machine: Xcarve
Location: Columbus Ohio

Re: Mantel

Post by Jan.vanderlinden »

Every time that you look at that, it will make you feel good.
Excellent work.
“I've learned so much from my mistakes, I'm thinking of making a few more”

garylmast
Vectric Wizard
Posts: 1162
Joined: Fri Oct 23, 2009 4:03 pm
Location: Sandy, Utah

Re: Mantel

Post by garylmast »

Your corbels and shelf in Oak look fabulous! Very clean carves!
Plus 1, great job!

Gary

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4478
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Mantel

Post by Rcnewcomb »

The corbels really work well in the design.
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

SteveNelson46
Vectric Wizard
Posts: 1147
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger using WinCNC
Location: Tucson, Az.

Re: Mantel

Post by SteveNelson46 »

garylmast wrote:
Sun Feb 21, 2021 5:02 pm
Your corbels and shelf in Oak look fabulous! Very clean carves!
Plus 1, great job!

Gary
Make that a +2.
Steve

User avatar
scotttarnor
Vectric Wizard
Posts: 397
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Mantel

Post by scotttarnor »

Very nice work!
Scott T

PRO4824
Vectric Apprentice
Posts: 68
Joined: Tue Apr 04, 2017 11:44 pm
Model of CNC Machine: AVID PRO4824
Location: West Kentucky USA

Re: Mantel

Post by PRO4824 »

Great job!!

wood_fly
Posts: 44
Joined: Tue Jan 24, 2012 8:42 am
Model of CNC Machine: Axiom AR8 Pro V5

Re: Mantel

Post by wood_fly »

The learning curve was obviously worth it! +3

paul1200
Posts: 2
Joined: Wed Sep 19, 2018 5:48 pm
Model of CNC Machine: Workbee & Self built 4X4 (heavy duty)
Location: Near JOG Highlands

Re: Mantel

Post by paul1200 »

Many thanks for all the positive comments, just need to get to grips with my own complete design.

Paul :D

ich-fräs-das
Posts: 18
Joined: Wed Oct 07, 2020 7:39 am
Model of CNC Machine: BZT PFE1000-PX
Location: South of Hamburg, Germany

Re: Mantel

Post by ich-fräs-das »

wow

Bobtail Farm
Vectric Craftsman
Posts: 183
Joined: Mon Dec 01, 2014 3:53 pm
Model of CNC Machine: Homemade

Re: Mantel

Post by Bobtail Farm »

+1

Post Reply