Make guitars with Aspire or VCarve

This section is for useful tips and tricks for Aspire
Post Reply
User avatar
Alex Navarro
Vectric Craftsman
Posts: 202
Joined: Sat Jan 15, 2011 1:37 pm
Model of CNC Machine: 3 axis
Location: Spain
Contact:

Make guitars with Aspire or VCarve

Post by Alex Navarro »

Hi everyone!

I did a complete tutorial showing how I make may guitars on VCarve and Aspire 11 (useful for 8.5 to 10.5 too)
This serie with more than 80 videos gave me a lot of job to edit and i hope you like.

I though maybe we can use this topic to share our knowledge on that and talk about the content.

This is the first video:


Sure, it is the 1.1 and I believe that it is too easy for you, but the Module 3 will have intermediate content.

Thank you

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Make guitars with Aspire or VCarve

Post by Rcnewcomb »

You may wish to include how to join vectors when the DXF file has them in smaller segments. An example is the OM_acoustic_guitar.dxf at grellier.fr/en/downloads

The body vector has segments that need to be joined.
Attachments
Screen Shot 2022-08-15 at 12.26.35 PM.png
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

Post Reply