Good Morning;
I'm fairly new to the forum. This is my first post.
A friend has asked me to make a sign for his future son in law. the bitmap i'm to use is business card size( we know how well that works) I've looked online, but that is the biggest I can find. So I've rebuilt the design, but that's where I'm hitting the wall. It will be 24 inches.
I'm hoping someone can help me out with the creating of a model, I'm willing to pay
Brian
Need help creating a model.
-
- Posts: 3
- Joined: Sun Feb 05, 2017 4:35 pm
- Model of CNC Machine: CanCam Desktop 23
Need help creating a model.
- Attachments
-
- Mr.Barber+Logo.png (6.73 KiB) Viewed 1679 times
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Need help creating a model.
First off, I'd work on my online search skills. I found this image in 30 seconds.
You don't say what exactly your problem is or what you're trying to do with the image. Are you looking for to create a vcarve or 2.5D image? Need more information to help.
You don't say what exactly your problem is or what you're trying to do with the image. Are you looking for to create a vcarve or 2.5D image? Need more information to help.
John
Maker of Chips
Maker of Chips
- FixitMike
- Vectric Wizard
- Posts: 2173
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Need help creating a model.
Would this do? I would need to find out how you wish to handle the tie areas. Contact me at mike-at-lyndamike.com (delete the hyphens).
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
- Posts: 3
- Joined: Sun Feb 05, 2017 4:35 pm
- Model of CNC Machine: CanCam Desktop 23
Re: Need help creating a model.
Hi Gentlemen
Thanks for the quick response.
I did the upgrade to Aspire, a couple months ago, but haven't had much time to play with it.
The picture in my head is as follows. The high point of the model would be the MR.BARBER/Scissors (i have the 3D scissors). Next would be the tie, then the black parts. I don't need the Est 2009. The lines for the tie could just be v-bit lines to separate the colors. The customer will be painting himself.
Thanks for the quick response.
I did the upgrade to Aspire, a couple months ago, but haven't had much time to play with it.
The picture in my head is as follows. The high point of the model would be the MR.BARBER/Scissors (i have the 3D scissors). Next would be the tie, then the black parts. I don't need the Est 2009. The lines for the tie could just be v-bit lines to separate the colors. The customer will be painting himself.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro