Downloading the 3D clipart?

This section is for useful tips and tricks for Aspire
Post Reply
John Murphy
Vectric Wizard
Posts: 676
Joined: Thu Jan 15, 2009 1:08 am
Model of CNC Machine: AXYZ 5010
Location: Maryhill Ontario Canada
Contact:

Downloading the 3D clipart?

Post by John Murphy »

I upgraded yesterday, but I'm not quite sure how to find or download the included clip art.

Could someone point me in the right direction?

John

User avatar
mfirlott
Vectric Craftsman
Posts: 208
Joined: Thu Feb 07, 2013 12:49 am
Model of CNC Machine: Stinger 1 (2014)
Location: Cantley, Quebec, Canada

Re: Downloading the 3D clipart?

Post by mfirlott »

You will receive an additional email from Vectric for access to the Portal to do the downloads.
(Mitch)
CAMaster Stinger I
Vectric Aspire v8
Epilog 45watt Helix Laser

John Murphy
Vectric Wizard
Posts: 676
Joined: Thu Jan 15, 2009 1:08 am
Model of CNC Machine: AXYZ 5010
Location: Maryhill Ontario Canada
Contact:

Re: Downloading the 3D clipart?

Post by John Murphy »

Thanks Mitch.

stankern
Vectric Wizard
Posts: 526
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: Downloading the 3D clipart?

Post by stankern »

can this take a few days from Vectric ?

plcamp
Vectric Apprentice
Posts: 93
Joined: Sun Feb 05, 2012 4:40 am
Model of CNC Machine: Home built wooden machine - Mach3/Aspire
Location: Fort Wayne, Indiana

Re: Downloading the 3D clipart?

Post by plcamp »

Downloaded the software update and all of the associated library files for Aspire 8 without a hitch, simply let the files install into the default directory. Beware, some of the clip-art library's are fairly large and may take several minutes to download depending on the speed of your connection and how busy the Vectric server is.

Paul

COWBOY1296
Vectric Wizard
Posts: 660
Joined: Thu Apr 15, 2010 10:03 pm
Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
Location: SOUTH CENTRAL COLORADO

Re: Downloading the 3D clipart?

Post by COWBOY1296 »

i bought the software update yesterday. it went without a hitch. But i have not heard from Vectric in reference to registering on the portal and the download of the clip art. Is it too soon to be worried?

Also another question. I compressed the setup file and added it to a thumb drive and transferred it to my lap top. It appears to be fine that way, but does compressing have its drawbacks.

WoodEraser
Vectric Apprentice
Posts: 198
Joined: Wed Aug 08, 2012 6:30 pm
Model of CNC Machine: Shark Pro Plus
Location: Liberty Twp (N. Cincinnati) OH

Re: Downloading the 3D clipart?

Post by WoodEraser »

mfirlott wrote:You will receive an additional email from Vectric for access to the Portal to do the downloads.
I downloaded the upgrade V8 on Wed and installed without a hitch but still waiting for the quoted e-mail.
How long should it take ?
Eric
The WoodEraser

Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio

User avatar
mtylerfl
Vectric Wizard
Posts: 4373
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Downloading the 3D clipart?

Post by mtylerfl »

WoodEraser wrote:
mfirlott wrote:You will receive an additional email from Vectric for access to the Portal to do the downloads.
I downloaded the upgrade V8 on Wed and installed without a hitch but still waiting for the quoted e-mail.
How long should it take ?
I believe you should have already received the email. Two things for you to check...

1) Is the email in your Spam Folder?

2) Are you certain you are using the exact same email address as when you initially registered your first Vectric product? (that's the email address they send the correspondence to)
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

COWBOY1296
Vectric Wizard
Posts: 660
Joined: Thu Apr 15, 2010 10:03 pm
Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
Location: SOUTH CENTRAL COLORADO

Re: Downloading the 3D clipart?

Post by COWBOY1296 »

in less than 24 hours after downloading aspire 8 i received the link to the portal with my clipart, thanks.

User avatar
larrybadgett
Vectric Wizard
Posts: 422
Joined: Fri Oct 20, 2006 1:21 pm
Model of CNC Machine: ShopSabre
Location: Corning, Iowa USA
Contact:

Re: Downloading the 3D clipart?

Post by larrybadgett »

COWBOY1296 wrote:in less than 24 hours after downloading aspire 8 i received the link to the portal with my clipart, thanks.
Your one of the lucky one's! Both original email for V8 and the Portal never made it for me. The second on for V8 came through. Still waiting and hoping the third works for the Portal. Going all electronic sounded great in theory, not so good in real life!
Woodchip
Wud Bi Tek
http://wudbitek.com/

WoodEraser
Vectric Apprentice
Posts: 198
Joined: Wed Aug 08, 2012 6:30 pm
Model of CNC Machine: Shark Pro Plus
Location: Liberty Twp (N. Cincinnati) OH

Re: Downloading the 3D clipart?

Post by WoodEraser »

Never sent to spam and Yes still using same e-mail address as original.
???
Eric
The WoodEraser

Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio

cbhelms
Posts: 25
Joined: Wed Dec 28, 2011 11:52 pm
Model of CNC Machine: CNC Shark HD4
Location: Charlotte, NC

Re: Downloading the 3D clipart?

Post by cbhelms »

I had the same problem as a few of you fellows, upgraded my Aspire on 2/27/15 got the email information to download program but I never got the email for the portal for the 3D Clipart. I waited until 3/6/15 and I sent Vectric an email about the portal email I never got, and within a couple of hours I received 2 emails from Vectric to log into the Portal to download the clipart. They must be very busy right now with all the upgrade requests, and I really appreciated their quick response.

Drop them and email like I did.

Colin Helms

Post Reply