Trying to do a simple profile cutout. Attached file should have only one TP - problem path.
I've never had this problem in the past 3 years.
Any help would be much appreciated.'
Thanks.
Error: No toolpath generated...
- Uncle Bob
- Vectric Apprentice
- Posts: 61
- Joined: Sun Jan 14, 2018 3:28 am
- Model of CNC Machine: Legacy Maverick 3x5 ATC
- Location: Culpeper, VA USA
Error: No toolpath generated...
- Attachments
-
- Snake U.crv3d
- (19 KiB) Downloaded 19 times
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Error: No toolpath generated...
Bob,
There was no toolpath in that file.
What were you trying to do?
There was no toolpath in that file.
What were you trying to do?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- adze_cnc
- Vectric Wizard
- Posts: 4381
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Error: No toolpath generated...
Bob,
Neither vector is closed. There are stray bits. One vector loops back upon itself. See circled parts in images (left prong and right prong).
Steven
Neither vector is closed. There are stray bits. One vector loops back upon itself. See circled parts in images (left prong and right prong).
Steven
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Error: No toolpath generated...
OK - I think I see the problem
Click on NODE edit - select one or both vectors
Look in the upper right area where the vertical and the arc "should" meet.
The vectors are not connected -- making it an open vector.
Adze beat me to the same conclusion
Click on NODE edit - select one or both vectors
Look in the upper right area where the vertical and the arc "should" meet.
The vectors are not connected -- making it an open vector.
Adze beat me to the same conclusion
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- Uncle Bob
- Vectric Apprentice
- Posts: 61
- Joined: Sun Jan 14, 2018 3:28 am
- Model of CNC Machine: Legacy Maverick 3x5 ATC
- Location: Culpeper, VA USA
Re: Error: No toolpath generated...
Thanks for the help from everyone. Intersection was the problem. Part cut.
V/R,
B
V/R,
B