I need help in creating an exact duplicate of the plaster impression below. My skills and knowledge are limited. If anyone is willing to take on this task, message me.
I need help!!
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: I need help!!
Is this something you have or have access to? You would be better off retaking the photo on a single colour background, possibly a dark background using natural light if possible to avoid reflections & shadows & also square to the item. Looks like you are at a bit of an angle in that picture
Re: I need help!!
This comes from a friend who would like this done in a wood carving. I may ask him to provide a couple of photos as you have suggested.
Thanks for your input.
Thanks for your input.
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: I need help!!
If you have time I believe we can walk you through the process. For the paw print you are going to create some basic shapes and then apply the paw print texture.
The trout tutorial does a similar thing by creating a basic fish shape and then applying the scales texture.
The trout tutorial does a similar thing by creating a basic fish shape and then applying the scales texture.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: I need help!!
I'm sensing that there is no way of making an exact duplicate of the jpeg.
Re: I need help!!
Thanks, I will be taking you up on the offer of the walk through.
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: I need help!!
Without refinement of the original JPEG probably not.
See attached relief. Unzip. Import as 3D model. Model is 5.75 inches wide and 0.5 inches thick.
See attached relief. Unzip. Import as 3D model. Model is 5.75 inches wide and 0.5 inches thick.
- Attachments
-
- molly paw 2.zip
- (277.45 KiB) Downloaded 25 times
- IslaWW
- Vectric Wizard
- Posts: 1403
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: I need help!!
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com