Just wanted to ask (looks like you can) but to be sure if you could copy the vcarve tools DB to your aspire tools directory and it should be safe & work?
(have some 100+ tools programed in some custom shape ones which I don't really have the profile vectors I made them with orignaly.)
b./
tools DB
-
- Vectric Wizard
- Posts: 349
- Joined: Sun Nov 19, 2006 2:20 am
- Location: Michigan
Re: tools DB
That is a good question. I would also like to know about the PP database. I have tweek the gcode-inch to work on my machine and would like to use it in Aspire.
-
- Vectric Wizard
- Posts: 349
- Joined: Sun Nov 19, 2006 2:20 am
- Location: Michigan
Re: tools DB
I've moved mine and looks like it works but only one way to be 100% sure.
b.
b.
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Re: tools DB
Hi,mark296 wrote:That is a good question. I would also like to know about the PP database. I have tweek the gcode-inch to work on my machine and would like to use it in Aspire.
You can use any of the PostProcessors from VCarve Pro with Aspire.
Yes - The tool databse from VCarve Pro is fully compatible with Aspirewcarrothers wrote:Just wanted to ask (looks like you can) but to be sure if you could copy the vcarve tools DB to your aspire tools directory and it should be safe & work?
(have some 100+ tools programed in some custom shape ones which I don't really have the profile vectors I made them with orignaly.)
b./
Brian
Re: tools DB
If you are using Vista, you might want to read Mark's post here. It sure saved me alot of time.
http://www.vectric.com/forum/viewtopic. ... 757#p25757
http://www.vectric.com/forum/viewtopic. ... 757#p25757