San Diego 2022 User Group Meeting

This forum is for general discussion about Aspire
Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

San Diego 2022 User Group Meeting

Post by Stephanie Downing »

600x600_SanDiego2022_website.jpg
San Diego 2022 User Group Meeting - Third Time Lucky 🤞

We are delighted to announce we are now taking new bookings for our upcoming User Group Meeting which will be taking place at the DoubleTree by Hilton San Diego hotel on the 23rd & 24th September 2022!

The fee per person to attend is $249.00, which includes refreshments and lunch throughout both days as well as a welcome pack, access to all of the presentations and a free gift.

BOOK HERE:
https://ugm.vectric.com/purchase

To help minimize costs, we have teamed up with the DoubleTree by Hilton San Diego hotel to offer a discounted accommodation rate of $159 per night (please note, this room rate excludes breakfast. Breakfast can be added for an additional $20 at the hotel if you choose).

To book your room at the discounted rate click the link below:
https://book.passkey.com/go/2022VectricUserGroupMeeting

Please note, rooms at our discounted rate are limited so make sure you book early to avoid disappointment.

We'll be packing both days full covering; a sneak peek at ‘What's New’ in version 11.5 along with projects and ideas to increase your knowledge and efficiency using the software. As well as the technical benefits, the User Group Meeting gives like-minded CNC enthusiasts the opportunity to get together, showcase their projects and share knowledge.

As with previous meetings, the meeting will take place over two days and will have a strong focus on our Aspire and VCarve software with some of the sessions also being relevant to Cut2D.

To make sure you do not miss any news or updates on upcoming new features or events sign up to our newsletter here:
https://www.vectric.com/

Please Note:
We have extended our refund policy until 1st May 2022. To cancel your booking please e-mail sales@vectric.com.


We can't wait to see you all there!

Stephanie
San Diego Tickets Image.jpg

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5864
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: San Diego 2022 User Group Meeting

Post by Rcnewcomb »

Is there a place on the portal where we can see if we have booked our UGM tickets for 2022?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: San Diego 2022 User Group Meeting

Post by Stephanie Downing »

Rcnewcomb wrote:
Mon Jul 25, 2022 5:47 pm
Is there a place on the portal where we can see if we have booked our UGM tickets for 2022?
Hi Randall,

Yes, you can see your event tickets in your V&CO account.

Simply head to https://portal.vectric.com/entitlements

If you scroll down past the software products you own you will see event tickets and UGM bundles if they have been purchased.

I hope this helps.
Thanks
Stephanie

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5864
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: San Diego 2022 User Group Meeting

Post by Rcnewcomb »

Thanks. I'm all registered and the hotel room is reserved.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: San Diego 2022 User Group Meeting

Post by Stephanie Downing »

Rcnewcomb wrote:
Tue Jul 26, 2022 3:24 pm
Thanks. I'm all registered and the hotel room is reserved.
Fantastic news Randall. The countdown is officially on. We're all looking forward to seeing everyone again this year!!

Beltramidave
Vectric Wizard
Posts: 520
Joined: Thu May 14, 2015 12:23 am
Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
Location: Bemidji, MN
Contact:

Re: San Diego 2022 User Group Meeting

Post by Beltramidave »

I should be registered as well, but don't see anything in my portal??
Looking forward to my second UGM!
Dave
https://lakesedgewoodcraft.com/

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: San Diego 2022 User Group Meeting

Post by Stephanie Downing »

Beltramidave wrote:
Tue Jul 26, 2022 3:46 pm
I should be registered as well, but don't see anything in my portal??
Looking forward to my second UGM!
Hi Dave,

Sorry about that, I will look in to why your booking is not showing in your V&CO account.

I have checked our database and I can see we have you booked on to this years UGM.

We're looking forward to seeing you there :)

Beltramidave
Vectric Wizard
Posts: 520
Joined: Thu May 14, 2015 12:23 am
Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
Location: Bemidji, MN
Contact:

Re: San Diego 2022 User Group Meeting

Post by Beltramidave »

Thank you for checking. Looking forward to it!!
Dave
https://lakesedgewoodcraft.com/

mcww_shop
Posts: 15
Joined: Tue Aug 02, 2022 1:15 pm
Model of CNC Machine: Legacy Maverick 3x5 Pro

Re: San Diego 2022 User Group Meeting

Post by mcww_shop »

Hi Stephanie,

I am new to the Aspire community. Do you have any UGMs planned for the east coast USA? Do you plan tohave any virtual UGMs?

Thanks,
Greg

User avatar
martin54
Vectric Archimage
Posts: 7332
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: San Diego 2022 User Group Meeting

Post by martin54 »

mcww_shop wrote:
Sat Aug 06, 2022 6:57 pm
Hi Stephanie,

I am new to the Aspire community. Do you have any UGMs planned for the east coast USA? Do you plan tohave any virtual UGMs?

Thanks,
Greg
The UGM's move about so at some point they will no doubt be closer to your location, Vectric announced last year (I think it was) that going forward the face-to-face user group meetings would be every other year with a virtual UGM in the years in between so going by that next years UGM should be virtual :lol: :lol:

mcww_shop
Posts: 15
Joined: Tue Aug 02, 2022 1:15 pm
Model of CNC Machine: Legacy Maverick 3x5 Pro

Re: San Diego 2022 User Group Meeting

Post by mcww_shop »

Thank you @martin54!

User avatar
HandyAndyInMtAiryNC
Posts: 26
Joined: Wed Aug 05, 2020 1:33 pm
Model of CNC Machine: Axiom Pro V5 Series
Location: Mt Airy, North Carolina
Contact:

Re: San Diego 2022 User Group Meeting

Post by HandyAndyInMtAiryNC »

Hello,
I.m checking on my reservations and I am not seeing anything in the Vectric portal. I know that we have registered.

Thank you in advance
Andrew

User avatar
Leo
Vectric Wizard
Posts: 4080
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: San Diego 2022 User Group Meeting

Post by Leo »

martin54 wrote:
Sat Aug 06, 2022 10:30 pm
mcww_shop wrote:
Sat Aug 06, 2022 6:57 pm
Hi Stephanie,

I am new to the Aspire community. Do you have any UGMs planned for the east coast USA? Do you plan tohave any virtual UGMs?

Thanks,
Greg
The UGM's move about so at some point they will no doubt be closer to your location, Vectric announced last year (I think it was) that going forward the face-to-face user group meetings would be every other year with a virtual UGM in the years in between so going by that next years UGM should be virtual :lol: :lol:


When was there a UGM on the East Coast? I would surely love to attend one. Boston Ma would be AWESOME.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

User avatar
adze_cnc
Vectric Wizard
Posts: 4303
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: San Diego 2022 User Group Meeting

Post by adze_cnc »

Leo wrote:
Mon Aug 08, 2022 1:23 pm
When was there a UGM on the East Coast?
How far from a coastliine is the Coast?
  • 2007 - Monessen, PA (effectively Pittsburgh)
  • 2008 - probably none
  • 2009 - Pittsburgh, PA and Dallas, TX
  • 2010 - Memphis, TN
  • 2011 - Las Vegas, NV
  • 2012 - Cincinnati, OH
  • 2013 - Las Vegas, NV
  • 2014 - Orlando, FL
  • 2015 - Las Vegas, NV
  • 2016 - Oralando, FL
  • 2017 - Las Vegas, NV
  • 2018 - Chicago, IL
  • 2019 - Denver, CO
  • 2020 - no physical meetup
  • 2021 - no physical meetup
  • 2022 - San Diego, CA
The UK folks have it easy as it is said that there is no place farther away from the coast than 70 miles (113 kilometres)

User avatar
martin54
Vectric Archimage
Posts: 7332
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: San Diego 2022 User Group Meeting

Post by martin54 »

When was there a UGM on the East Coast? I would surely love to attend one. Boston Ma would be AWESOME.

I didn't say there had been, I said it moved about & at some point, it might be closer to where they lived :lol: :lol: :lol:

The UK folks have it easy as it is said that there is no place farther away from the coast than 70 miles (113 kilometres)

It depends how you define easy, travel-wise maybe but we only get one day & don't get the guest speakers. I would love to be able to attend a UGM over the other side of the pond but in order for that to happen I need to win the Lottery first :lol: :lol: :lol:

Post Reply