Aspire Tutorials... Just where are they?

This forum is for general discussion about Aspire
Post Reply
VE5MDH
Posts: 44
Joined: Sun Sep 17, 2017 6:41 am
Model of CNC Machine: Shapeoko3
Location: Saskatchewan, Canada

Aspire Tutorials... Just where are they?

Post by VE5MDH »

Hi all!

I was just wondering where the tutorial files are located? Well, I know that they should be within the Clipart, (I do see the folder, but it is just empty!) but all I'm locating are JPG images for the tutorials, and not the 3DCRV, or any TXT files.

Any ideas would be grand! Do I have to figure out where on the Vectric Portal they could be, or should have they been included with my dnld or on the USB Thumb Drive?

Any ideas where Tutorial files are located??? I was just watching a YouTube video: Vectric V10 Tutorials | 3D Modeling | Creating a Dished Recess, and following the advice, I'm coming up blank for my Tutorial files, you know, the horses head.

Thanks in advance all!


Michael

Vic-builds
Posts: 5
Joined: Mon Jul 05, 2021 3:47 am
Model of CNC Machine: Avid Pro 5'x5', 4 HP PlugnPlay, Mach4

Re: Aspire Tutorials... Just where are they?

Post by Vic-builds »

https://www.vectric.com/support/tutorials/aspire?

There's an installer button on each tutorial page

VE5MDH
Posts: 44
Joined: Sun Sep 17, 2017 6:41 am
Model of CNC Machine: Shapeoko3
Location: Saskatchewan, Canada

Re: Aspire Tutorials... Just where are they?

Post by VE5MDH »

Thanks for this info, Vic! Wonderful assistance!

Michael

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Aspire Tutorials... Just where are they?

Post by Adrian »

You can access the tutorials directly from the Help (Video Tutorial Browser) in Aspire.

As Vic says there is an install and download button below each video. The install button will automatically launch and install the videos whereas the download will download the installer file so it can be copied and run on an offline machine or the local machine if the install method doesn't work for you.

When the installer runs it will tell you where the files are installed. The root folder for tutorials is Public Documents\Vectric Files\Tutorial Files.

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: Aspire Tutorials... Just where are they?

Post by martin54 »

I normally just access them from my portal account, :lol: :lol: :lol:

Post Reply