Does anyone have a current Post Processor for a Thermwood CNC machine that works with the latest Version11 software ?
The older version of the PP don't work.
Thanks in advance.
Michael
Thermwood PP
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Thermwood PP
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: Thermwood PP
If a post processor works with an older version of the software, it should still work with the newer version of the software.
(With a very small number of caveats).
Drop an email to support with the post processor and we will check it out for you.
Cheers,
Mark.
(With a very small number of caveats).
Drop an email to support with the post processor and we will check it out for you.
Cheers,
Mark.
-
- Posts: 32
- Joined: Tue Jan 30, 2018 5:45 pm
- Model of CNC Machine: Axiom, Thermwood
- Location: Dunlap, IL 61525
- Contact:
Re: Thermwood PP
@Mark:PM sent. Thx.
-
- Vectric Craftsman
- Posts: 215
- Joined: Sat Apr 26, 2008 2:45 pm
- Model of CNC Machine: Thermwood CS-45 5 x 10
- Location: Capac, Michigan
- Contact:
Re: Thermwood PP
So, have you got yourself a Thermwood now Michael? I have a good Thermood post for you, just not tested, on version 11
Will Williamson willmade.com
Williamson Lumber & Millwork Inc.
Capac, Michigan
Williamson Lumber & Millwork Inc.
Capac, Michigan
-
- Vectric Craftsman
- Posts: 215
- Joined: Sat Apr 26, 2008 2:45 pm
- Model of CNC Machine: Thermwood CS-45 5 x 10
- Location: Capac, Michigan
- Contact:
Re: Thermwood PP
Here you go
- Attachments
-
- Thermwood_CS45-510_inch (2).pp.txt
- (4.96 KiB) Downloaded 108 times
Will Williamson willmade.com
Williamson Lumber & Millwork Inc.
Capac, Michigan
Williamson Lumber & Millwork Inc.
Capac, Michigan
- mezalick
- Vectric Wizard
- Posts: 2982
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: Thermwood PP
Thanks, much appreciated.
It's for a friend.
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com