Downloaded free trial Aspire 11 , attached is a part i want to model and wrap in ( A axis rotary ). I have watched videos from vcarve to model in Aspire , but they load a 3d model instead of creating the model . I have Desktop pro 11 but from what i read , it will not model the example . Before i spend the money for the upgrade , i want to know i can create models of table legs and such !
Thanks
Ed
Create 3d model in aspire 11
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Create 3d model in aspire 11
Ed, the SHORT answer is yes, but so can V-Carve Pro. Aspire would do it the same way V-Carve would.
You do not need Aspire to create that table leg.
V-Carve Pro 11 can do that as a wrapped rotary project but you may need to be creative as the limitation with Desktop is 24".
HOW to do it will require some learning. Vectric has a GREAT number of tutorials available. You should "STUDY" --- not just watch --- the tutorials on wrapped machining and rotary machining.
You do not need Aspire to create that table leg.
V-Carve Pro 11 can do that as a wrapped rotary project but you may need to be creative as the limitation with Desktop is 24".
HOW to do it will require some learning. Vectric has a GREAT number of tutorials available. You should "STUDY" --- not just watch --- the tutorials on wrapped machining and rotary machining.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Apprentice
- Posts: 60
- Joined: Fri Mar 06, 2020 8:04 pm
- Model of CNC Machine: Fineline automation 50" x 50"
Re: Create 3d model in aspire 11
Thanks , Desktop pro has no length restrictions , only the demo has the 24" Limit .
Thanks for your help !
Ed
Thanks for your help !
Ed
- martin54
- Vectric Archimage
- Posts: 7351
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Create 3d model in aspire 11
Are you sure you don't already have Vcarve pro? There isn't a Desktop pro in Vectrics software titles, it's either Vcarve desktop or Vcarve pro, the Desktop version has a size limit not just the trial but the licenced version although you can exceed 24 inch by tiling I believe.
- SteveNelson46
- Vectric Wizard
- Posts: 2304
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Create 3d model in aspire 11
Check out this tutorial. It explains how to create a spindle/table leg in Aspire.
Steve