BUG - Font list empty in v11

This forum is for general discussion about Aspire
Post Reply
matth1978
Posts: 5
Joined: Sun Sep 05, 2021 4:24 pm
Model of CNC Machine: Teckel V series

BUG - Font list empty in v11

Post by matth1978 »

I've just opened a file in v11 that was open and edited 10 mins prior.

The list of fonts is now blank.

I have closed and restarted the PC to no avail.

If I open the file in 10.5 all the fonts are available in the list.

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: BUG - Font list empty in v11

Post by martin54 »

You would probably be best to contact Vectric support directly about this, Vectric software uses the Windows installed fonts & doesn't have it's own font management, no idea why it should be working OK in one version & not another. Might require you install V11 again but I would check with support first. I've certainly never had any issues with fonts not showing myself in any version of the software.

support@vectric.com

matth1978
Posts: 5
Joined: Sun Sep 05, 2021 4:24 pm
Model of CNC Machine: Teckel V series

Re: BUG - Font list empty in v11

Post by matth1978 »

martin54 wrote:
Mon Sep 13, 2021 12:27 pm
You would probably be best to contact Vectric support directly about this, Vectric software uses the Windows installed fonts & doesn't have it's own font management, no idea why it should be working OK in one version & not another. Might require you install V11 again but I would check with support first. I've certainly never had any issues with fonts not showing myself in any version of the software.

support@vectric.com
Indeed, that's what I thought. Been using Aspire since v8 and never had an issue.
I will take it up with support if re-installing doesn't work.

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: BUG - Font list empty in v11

Post by mtylerfl »

Hi Matt,

Here’s a shot in the dark, but perhaps worth a try:

Try running your Vectric v11 software “as Administrator” to see if your font list then reappears.
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

matth1978
Posts: 5
Joined: Sun Sep 05, 2021 4:24 pm
Model of CNC Machine: Teckel V series

Re: BUG - Font list empty in v11

Post by matth1978 »

Thanks for the input guys.

In the end it came down to user error!

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: BUG - Font list empty in v11

Post by martin54 »

matth1978 wrote:
Tue Sep 14, 2021 9:18 am
Thanks for the input guys.

In the end it came down to user error!
Most things do :lol: :lol: :lol:

Can I ask how? It may help someone in the future & it's not something that I remember seeing on the forum before.

Post Reply