V11 Installing 11.005 Patch
-
- Vectric Apprentice
- Posts: 68
- Joined: Tue Mar 02, 2010 10:46 pm
- Model of CNC Machine: Camaster Stinger Epilog Aspire
- Location: Austin TX
V11 Installing 11.005 Patch
After installing the 11.005 patch my Aspire v11 quit working. so i
reinstalled V11 verified it was working and then tried the patch again
and Aspire V11 again quit working. Any one else having this problem
Thanks
John
reinstalled V11 verified it was working and then tried the patch again
and Aspire V11 again quit working. Any one else having this problem
Thanks
John
-
- Vectric Craftsman
- Posts: 186
- Joined: Fri Apr 04, 2014 2:21 am
- Model of CNC Machine: Axiom AR4Pro+ and AR8Pro+
- Location: Edmonton, Alberta, Canada
Re: V11 Installing 11.005 Patch
I am having an issue with installing 11.005, but my issue is that Malwarebytes (my anti-virus software) detects a file as malware. See photo for details.
I'm presuming that this is a false-postive, but I'm having an issue trying to allow Malwarbytes to disregard it (haven't had to allow exceptions for quite some time, so I have to re-learn how to do it).
Allan
I'm presuming that this is a false-postive, but I'm having an issue trying to allow Malwarbytes to disregard it (haven't had to allow exceptions for quite some time, so I have to re-learn how to do it).
Allan
- gkas
- Vectric Wizard
- Posts: 1450
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: V11 Installing 11.005 Patch
My upgrade went fine...
- jimandi5000
- Vectric Wizard
- Posts: 1046
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
- SteveNelson46
- Vectric Wizard
- Posts: 2275
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: V11 Installing 11.005 Patch
Mine failed also until I disabled Malwarebytes. I always have to temporarily disable it when installing upgrades. It is possible to include the installer in the "Allow List" but since the installer names aren't always the same it's just easier to temporarily disable it.
Steve
-
- Vectric Staff
- Posts: 520
- Joined: Wed Jul 19, 2017 11:59 am
- Model of CNC Machine: Craft CNC DS1
Re: V11 Installing 11.005 Patch
Do you have any anti-virus software installed? We've fixed an issue which had this same symptom with the Sophos anti-virus. We've also seen it happen with F-Secure in the past but not in V11.jdonaldson wrote: ↑Thu Jul 29, 2021 9:18 pmAfter installing the 11.005 patch my Aspire v11 quit working. so i
reinstalled V11 verified it was working and then tried the patch again
and Aspire V11 again quit working. Any one else having this problem
Thanks
John
--------------
Mohamed
++++++++
Mohamed
++++++++
- larrybadgett
- Posts: 457
- Joined: Fri Oct 20, 2006 1:21 pm
- Model of CNC Machine: ShopSabre
- Location: Corning, Iowa USA
- Contact:
Re: V11 Installing 11.005 Patch
V11 getting patches in the first week out?????????????????????
- Adrian
- Vectric Archimage
- Posts: 14503
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: V11 Installing 11.005 Patch
I would be absolutely gobsmacked if it didn't. The reality of testing is that it's impossible without huge amounts of time and labour to test every possible combination of what the software can do.larrybadgett wrote: ↑Fri Jul 30, 2021 10:17 amV11 getting patches in the first week out?????????????????????
- scottp55
- Vectric Wizard
- Posts: 4704
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: V11 Installing 11.005 Patch
No way all the Beta testers can anticipate all the funky permutations we crazy carvers can come up with!!
My hat is off to Vectric and all the Beta testers who helped with V11!!
scott
My hat is off to Vectric and all the Beta testers who helped with V11!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Apprentice
- Posts: 68
- Joined: Tue Mar 02, 2010 10:46 pm
- Model of CNC Machine: Camaster Stinger Epilog Aspire
- Location: Austin TX
Re: V11 Installing 11.005 Patch
We're running Eset here, i will try disabling it even though it's
never had a problem before
Thanks
John
never had a problem before
Thanks
John
- Uncle Bob
- Vectric Apprentice
- Posts: 61
- Joined: Sun Jan 14, 2018 3:28 am
- Model of CNC Machine: Legacy Maverick 3x5 ATC
- Location: Culpeper, VA USA
Re: V11 Installing 11.005 Patch
No issues here. I run McAfee antivirus. I did notice that in v 11.003 that the conversion from mm to in was not correct. I see that was fixed in 11.005.
Vectric staff have created GREAT CAD programs and does an outstanding job fixing issues that may arise. There is no way they can anticipate every situation the software may be used. Hats off to the staff!
Thank you Vectric for all you do.
Vectric staff have created GREAT CAD programs and does an outstanding job fixing issues that may arise. There is no way they can anticipate every situation the software may be used. Hats off to the staff!
Thank you Vectric for all you do.
- Leo
- Vectric Wizard
- Posts: 4080
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: V11 Installing 11.005 Patch
Adrian? GOBSMACKED?Adrian wrote: ↑Fri Jul 30, 2021 11:15 amI would be absolutely gobsmacked if it didn't. The reality of testing is that it's impossible without huge amounts of time and labour to test every possible combination of what the software can do.larrybadgett wrote: ↑Fri Jul 30, 2021 10:17 amV11 getting patches in the first week out?????????????????????
Is that a British thing?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC