aspire 11.00 shows up as an ugrade to 10.5

This forum is for general discussion about Aspire
Post Reply
stankern
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

aspire 11.00 shows up as an ugrade to 10.5

Post by stankern »

But its not a free upgrade is it?
So this must be it for aspire 10.5
Its not clear that this is a charge until you go to download it

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: aspire 11.00 shows up as an ugrade to 10.5

Post by Stephanie Downing »

stankern wrote:
Thu Jul 22, 2021 2:20 am
But its not a free upgrade is it?
So this must be it for aspire 10.5
Its not clear that this is a charge until you go to download it
Good morning Stan,

Please can you confirm where it is you are seeing this message so that we can look in to this for you?

Thanks
Stephanie

wb9tpg
Vectric Wizard
Posts: 453
Joined: Tue Sep 04, 2018 2:49 pm
Model of CNC Machine: Shapeoko 3 XL

Re: aspire 11.00 shows up as an ugrade to 10.5

Post by wb9tpg »

I assume this is what he's talking about. In 10.5 I see this in the upper right corner which is OK for me.
Screen Shot 2021-07-22 at 7.47.00 AM.png
Gary Mitchell
Kentucky, USA

stankern
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: aspire 11.00 shows up as an ugrade to 10.5

Post by stankern »

"I assume this is what he's talking about. In 10.5 I see this in the upper right corner"
Yes this is where I first saw it, but its ok now as i got an email today talking about the upgrade cost
being in the right hand corner looks like a regular upgrade as we have been getting
Last big question will version 11 work with XP pro

User avatar
Jim_in_PA
Vectric Craftsman
Posts: 270
Joined: Wed Jan 10, 2018 3:24 am
Model of CNC Machine: Camaster Stinger II SR-44 (MacOS user)

Re: aspire 11.00 shows up as an ugrade to 10.5

Post by Jim_in_PA »

stankern wrote:
Thu Jul 22, 2021 2:02 pm

Last big question will version 11 work with XP pro
Per the Vectric Website... 64 bit and

"Operating System: Vista, 7, 8, 8.1 or Windows 10 with 4Gb RAM"

4DThinker
Vectric Wizard
Posts: 1700
Joined: Sun Sep 23, 2012 12:14 pm
Model of CNC Machine: CNC Shark Pro, Probotix Meteor 25" x 50"

Re: aspire 11.00 shows up as an ugrade to 10.5

Post by 4DThinker »

I see "version 11.003 available" in both my person 10.5 version as well as the university install I use. I was hoping it was a free upgrade but alas my upgrade to 10.5 didn't fall within the required time window. It looks just like the messages I see when any previous upgrade is available. Not complaining. Just noting that it had me confused for a sec thinking it might be a free upgrade like all the fractional upgrade before this were.
4D

Post Reply