Online Worldwide User Group Meeting 2021
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Online Worldwide User Group Meeting 2021
I’ll make my coffee extra strong so I can join at 4AM Pacific. I’m really looking forward to the Saturday rotary session.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Our new site for the 2021 User Group Meeting is now LIVE!
As we get ever closer to the 2021 World Wide User Group Meeting we have launched a dedicated site to host the special event that is happening on the 9th,10th and 11th of September!
Head over now to see the schedule, learn about the speakers and the presentations themselves! You can sign up to get reminded 15 minutes before a presentation is about to begin! Not going to be around when the event goes live? No worries we will archive the video over on the site straight after the live stream for you to watch at your convenience!
We can't wait for you to join us over the three day extravaganza! Head over to https://ugm.vectric.com/home
As we get ever closer to the 2021 World Wide User Group Meeting we have launched a dedicated site to host the special event that is happening on the 9th,10th and 11th of September!
Head over now to see the schedule, learn about the speakers and the presentations themselves! You can sign up to get reminded 15 minutes before a presentation is about to begin! Not going to be around when the event goes live? No worries we will archive the video over on the site straight after the live stream for you to watch at your convenience!
We can't wait for you to join us over the three day extravaganza! Head over to https://ugm.vectric.com/home
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Online Worldwide User Group Meeting 2021
I've been browsing around on the site Stephanie.
Congrats to the Whole Team!!
scott
Congrats to the Whole Team!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Online Worldwide User Group Meeting 2021
First sip of espresso quatro.....looking forward to it!!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Today is the day. The 2021 User Group Meeting is finally here
Join us from 12pm BST/ 7am EDT/4am PDT all the way through to 9pm BST/4pm EDT/1pm PDT
We'll be here over the whole 3 day event 9th-11th September to bring you projects, inspiration and how-to's! We can't wait to have you around and join in on the chat!
Don't want to miss a session? Then head over to https://ugm.vectric.com/ to sign in, and set your reminders for the sessions you want to watch in real time, we'll send you a reminder 15 minutes before the event so you don't miss a thing! Don't worry if you can't be there when the session goes live, we'll archive all of the video's from this years event on the site as well as on our YouTube channel so that you can watch them at a time to suit you.
There's also a dedicated place to share your projects too, so head on over an upload your project, you're bound to inspire others! Not only can you share your projects but you can ask questions in the dedicated "CHAT" section too! A space for like minded users to help and share information all in one place!
Sign in now ready for to get involved, ask your questions and take in the projects, inspiration and software training at https://ugm.vectric.com/
We hope you enjoy our 2021 User Group Meeting!!
Join us from 12pm BST/ 7am EDT/4am PDT all the way through to 9pm BST/4pm EDT/1pm PDT
We'll be here over the whole 3 day event 9th-11th September to bring you projects, inspiration and how-to's! We can't wait to have you around and join in on the chat!
Don't want to miss a session? Then head over to https://ugm.vectric.com/ to sign in, and set your reminders for the sessions you want to watch in real time, we'll send you a reminder 15 minutes before the event so you don't miss a thing! Don't worry if you can't be there when the session goes live, we'll archive all of the video's from this years event on the site as well as on our YouTube channel so that you can watch them at a time to suit you.
There's also a dedicated place to share your projects too, so head on over an upload your project, you're bound to inspire others! Not only can you share your projects but you can ask questions in the dedicated "CHAT" section too! A space for like minded users to help and share information all in one place!
Sign in now ready for to get involved, ask your questions and take in the projects, inspiration and software training at https://ugm.vectric.com/
We hope you enjoy our 2021 User Group Meeting!!
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Session one is live now!
Head over to https://ugm.vectric.com/live to tune in to Edwards Vectric update and What's New in V11 session!
Head over to https://ugm.vectric.com/live to tune in to Edwards Vectric update and What's New in V11 session!
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Online Worldwide User Group Meeting 2021
In less than 60 minutes I've already learned several new things during the opening presentation.
Definitely worth my time even though it started at 4AM Pacific time.
Definitely worth my time even though it started at 4AM Pacific time.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Amazing news Randall! Thank you so much for joining us so early in your day. We appreciate your dedication to our UGM and we are so grateful.
We hope this is just the beginning and that you learn lots more in all of the upcoming sessions!
Have a great day
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Online Worldwide User Group Meeting 2021
Just got done watching the first video. Lots of really cool new stuff. Definitely things I can use - for sure. I am excited.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Fantastic news Leo
For those of you would weren't able to join us for the live session - you can still watch Edward's session here at a time to suit you: https://ugm.vectric.com/session/vectric ... new-in-v11.
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Next up we have the first of two modeling sessions from our very own Queen on CNC - Beki!
In this session Beki will be giving a beginners guide presentation to modeling in Aspire. To introduce the session she will talk about some core essentials to creating good quality models, from looking at the importance of modeling resolution, what tools are available and the effect your vectors have on the components that you create. She’ll then go through three quick-fire examples that cover lots of modeling tools to help you get started.
Tune in LIVE from 3PM BST here: https://ugm.vectric.com/live
Remember you can catch up on Beki's session here if you are unable to make it to the live event: https://ugm.vectric.com/session/modelin ... oundations
In this session Beki will be giving a beginners guide presentation to modeling in Aspire. To introduce the session she will talk about some core essentials to creating good quality models, from looking at the importance of modeling resolution, what tools are available and the effect your vectors have on the components that you create. She’ll then go through three quick-fire examples that cover lots of modeling tools to help you get started.
Tune in LIVE from 3PM BST here: https://ugm.vectric.com/live
Remember you can catch up on Beki's session here if you are unable to make it to the live event: https://ugm.vectric.com/session/modelin ... oundations
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Online Worldwide User Group Meeting 2021
Join us now with Bill Young of ShopBot Tools for an inspiring session recognizing a selection of makers who utilized their tools, skills and workshops to help their local communities and those most in need during the Covid 19 global pandemic.
https://ugm.vectric.com/live
Such an inspiring and heart warming project showcasing how the community comes together when it's needed most - Catch up here if you aren't able to watch live - https://ugm.vectric.com/session/desks-unite
https://ugm.vectric.com/live
Such an inspiring and heart warming project showcasing how the community comes together when it's needed most - Catch up here if you aren't able to watch live - https://ugm.vectric.com/session/desks-unite
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Online Worldwide User Group Meeting 2021
So does Beki now get a new nameStephanie Downing wrote: ↑Thu Sep 09, 2021 2:45 pmNext up we have the first of two modeling sessions from our very own Queen on CNC - Beki!
In this session Beki will be giving a beginners guide presentation to modeling in Aspire. To introduce the session she will talk about some core essentials to creating good quality models, from looking at the importance of modeling resolution, what tools are available and the effect your vectors have on the components that you create. She’ll then go through three quick-fire examples that cover lots of modeling tools to help you get started.
Tune in LIVE from 3PM BST here: https://ugm.vectric.com/live
Modeling the Foundations with Beki.png
Remember you can catch up on Beki's session here if you are unable to make it to the live event: https://ugm.vectric.com/session/modelin ... oundations
Queen Beki?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC