VERSION 11 - COMING SOON
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: VERSION 11 - COMING SOON
On Design and Make - WATERSIDE - Cottage Life
I cannot insert the "rowboat"
Everything else works as it should.
I cannot insert the "rowboat"
Everything else works as it should.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: VERSION 11 - COMING SOON
Hi Leo,
We have taken a look at this and it appears to work correctly for us. Can I check - are you downloading the clipart from within the software or have you used the installer from within V&CO?
Thanks
Stephanie
-
- Posts: 4
- Joined: Tue Jan 28, 2020 2:11 pm
- Model of CNC Machine: Axiom
- Location: ON, Canada
Re: VERSION 11 - COMING SOON
Hello, I have gone to https://portal.vectric.com/clipart and I see all of the other clipart that I purchased with V10 but not the waterside package. I upgraded to Aspire about a month ago, do I still qualify for the clipart as well?
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: VERSION 11 - COMING SOON
I used the installer. I even tried to reinstall, reboot software, reboot computer. I just tried again this morning - no rowboat.Stephanie Downing wrote: ↑Wed Jul 21, 2021 7:01 pmHi Leo,
We have taken a look at this and it appears to work correctly for us. Can I check - are you downloading the clipart from within the software or have you used the installer from within V&CO?
Thanks
Stephanie
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Craftsman
- Posts: 108
- Joined: Thu Nov 28, 2019 6:12 am
- Model of CNC Machine: Onefinity X-50 Woodworker
- Location: Fresno, CA
Re: VERSION 11 - COMING SOON
Same here. Download from the portal and ran the installer and I can load all items except the rowboat.
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: VERSION 11 - COMING SOON
That's 2 users up the creek without a rowboat - anybody else?
Would any that downloaded the Seaside care to try the rowboat in the cottage collection?
Would any that downloaded the Seaside care to try the rowboat in the cottage collection?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Wizard
- Posts: 858
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: VERSION 11 - COMING SOON
I can't load it into a file either
Bob
Bob
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: VERSION 11 - COMING SOON
Hi Guys,
Thank you for letting us know. We're in the process of re-uploading it as there must have been an issue with that one model.
Please can you try re-downloading to see if that has fixed your row-boat issues
Thank you so much and sorry about that!
Stephanie
Thank you for letting us know. We're in the process of re-uploading it as there must have been an issue with that one model.
Please can you try re-downloading to see if that has fixed your row-boat issues
Thank you so much and sorry about that!
Stephanie
- Mark Jones
- Vectric Craftsman
- Posts: 142
- Joined: Fri Aug 28, 2020 8:38 pm
- Model of CNC Machine: Shark HD 5
- Location: Ozark
- Contact:
Re: VERSION 11 - COMING SOON
When will ver 11 allow version 10.5 gadgets to work. Box Creator is one I use quite often. Is there a tweak I can do to the lui file to allow 11 to work with it?
Mark Jones
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: VERSION 11 - COMING SOON
Hi Mark,Mark Jones wrote: ↑Thu Jul 22, 2021 5:19 pmWhen will ver 11 allow version 10.5 gadgets to work. Box Creator is one I use quite often. Is there a tweak I can do to the lui file to allow 11 to work with it?
There is a box creator gadget that can be used in V11. The current version 1.3 can be found here : https://gadgets.vectric.com/V10/box_creator.html.
I hope this helps
Thanks
Stephanie
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: VERSION 11 - COMING SOON
Hi Mark,Mark Jones wrote: ↑Thu Jul 22, 2021 5:19 pmWhen will ver 11 allow version 10.5 gadgets to work. Box Creator is one I use quite often. Is there a tweak I can do to the lui file to allow 11 to work with it?
There is a box creator gadget that can be used in V11. The current version 1.3 can be found here : https://gadgets.vectric.com/V10/box_creator.html.
I hope this helps
Thanks
Stephanie
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
- Mark Jones
- Vectric Craftsman
- Posts: 142
- Joined: Fri Aug 28, 2020 8:38 pm
- Model of CNC Machine: Shark HD 5
- Location: Ozark
- Contact:
Re: VERSION 11 - COMING SOON
Thanks. Got the Box Creator working great! Thanks for a quick response!
Mark Jones