VERSION 11 - COMING SOON

This forum is for general discussion about Aspire
Post Reply
User avatar
Leo
Vectric Wizard
Posts: 4080
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: VERSION 11 - COMING SOON

Post by Leo »

On Design and Make - WATERSIDE - Cottage Life

I cannot insert the "rowboat"
Everything else works as it should.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: VERSION 11 - COMING SOON

Post by Stephanie Downing »

Leo wrote:
Wed Jul 21, 2021 6:51 pm
On Design and Make - WATERSIDE - Cottage Life

I cannot insert the "rowboat"
Everything else works as it should.
Hi Leo,

We have taken a look at this and it appears to work correctly for us. Can I check - are you downloading the clipart from within the software or have you used the installer from within V&CO?

Thanks
Stephanie

Frenchbull
Posts: 4
Joined: Tue Jan 28, 2020 2:11 pm
Model of CNC Machine: Axiom
Location: ON, Canada

Re: VERSION 11 - COMING SOON

Post by Frenchbull »

Hello, I have gone to https://portal.vectric.com/clipart and I see all of the other clipart that I purchased with V10 but not the waterside package. I upgraded to Aspire about a month ago, do I still qualify for the clipart as well?

User avatar
Leo
Vectric Wizard
Posts: 4080
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: VERSION 11 - COMING SOON

Post by Leo »

Stephanie Downing wrote:
Wed Jul 21, 2021 7:01 pm
Leo wrote:
Wed Jul 21, 2021 6:51 pm
On Design and Make - WATERSIDE - Cottage Life

I cannot insert the "rowboat"
Everything else works as it should.
Hi Leo,

We have taken a look at this and it appears to work correctly for us. Can I check - are you downloading the clipart from within the software or have you used the installer from within V&CO?

Thanks
Stephanie
I used the installer. I even tried to reinstall, reboot software, reboot computer. I just tried again this morning - no rowboat.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

martindg
Vectric Craftsman
Posts: 107
Joined: Thu Nov 28, 2019 6:12 am
Model of CNC Machine: Onefinity X-50 Woodworker
Location: Fresno, CA

Re: VERSION 11 - COMING SOON

Post by martindg »

Same here. Download from the portal and ran the installer and I can load all items except the rowboat.

User avatar
Leo
Vectric Wizard
Posts: 4080
Joined: Sat Jul 14, 2007 3:02 am
Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
Location: East Freetown, Ma.
Contact:

Re: VERSION 11 - COMING SOON

Post by Leo »

That's 2 users up the creek without a rowboat - anybody else?

Would any that downloaded the Seaside care to try the rowboat in the cottage collection?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC

Bob Reda
Vectric Wizard
Posts: 858
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: VERSION 11 - COMING SOON

Post by Bob Reda »

I can't load it into a file either

Bob

jam1962
Vectric Craftsman
Posts: 182
Joined: Tue Oct 06, 2009 4:45 pm
Model of CNC Machine: Self built 36x25x7
Location: Hopewell, Ohio

Re: VERSION 11 - COMING SOON

Post by jam1962 »

Same here
Jay Morris...

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: VERSION 11 - COMING SOON

Post by Stephanie Downing »

Hi Guys,

Thank you for letting us know. We're in the process of re-uploading it as there must have been an issue with that one model.

Please can you try re-downloading to see if that has fixed your row-boat issues :D

Thank you so much and sorry about that!

Stephanie

Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Re: VERSION 11 - COMING SOON

Post by Mark Jones »

When will ver 11 allow version 10.5 gadgets to work. Box Creator is one I use quite often. Is there a tweak I can do to the lui file to allow 11 to work with it?
Mark Jones

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: VERSION 11 - COMING SOON

Post by Stephanie Downing »

Mark Jones wrote:
Thu Jul 22, 2021 5:19 pm
When will ver 11 allow version 10.5 gadgets to work. Box Creator is one I use quite often. Is there a tweak I can do to the lui file to allow 11 to work with it?
Hi Mark,

There is a box creator gadget that can be used in V11. The current version 1.3 can be found here : https://gadgets.vectric.com/V10/box_creator.html.

I hope this helps :D

Thanks
Stephanie

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: VERSION 11 - COMING SOON

Post by Stephanie Downing »

Mark Jones wrote:
Thu Jul 22, 2021 5:19 pm
When will ver 11 allow version 10.5 gadgets to work. Box Creator is one I use quite often. Is there a tweak I can do to the lui file to allow 11 to work with it?
Hi Mark,

There is a box creator gadget that can be used in V11. The current version 1.3 can be found here : https://gadgets.vectric.com/V10/box_creator.html.

I hope this helps :D

Thanks
Stephanie

jam1962
Vectric Craftsman
Posts: 182
Joined: Tue Oct 06, 2009 4:45 pm
Model of CNC Machine: Self built 36x25x7
Location: Hopewell, Ohio

Re: VERSION 11 - COMING SOON

Post by jam1962 »

Row boat works now
Jay Morris...

Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: VERSION 11 - COMING SOON

Post by Stephanie Downing »

jam1962 wrote:
Thu Jul 22, 2021 5:31 pm
Row boat works now
Fantastic! Thank you so much for confirming!

Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Re: VERSION 11 - COMING SOON

Post by Mark Jones »

Thanks. Got the Box Creator working great! Thanks for a quick response!
Mark Jones

Post Reply