Relief carving of Pilsner glass with beer foam

This forum is for general discussion about Aspire
Post Reply
User avatar
jssussex@gmail.com
Vectric Apprentice
Posts: 66
Joined: Tue Jan 31, 2012 10:24 pm
Model of CNC Machine: Legacy Maverick 3X5
Location: Sussex, WI
Contact:

Relief carving of Pilsner glass with beer foam

Post by jssussex@gmail.com »

I'm looking for what I think is referred to a Pilsner glass with a head of foam. A friend wants me to carve one 6 foot tall with a football in the base stem similar to the picture below. If anyone can point me towards one before I start from scratch I would appreciate it.
thumbnail_ATT00001.jpg

User avatar
ohiolyons
Vectric Wizard
Posts: 1702
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Relief carving of Pilsner glass with beer foam

Post by ohiolyons »

So do you want only half like Design & Make models or are you making a 6' completely round?
John Lyons
CNC in Kettering, Ohio

User avatar
jssussex@gmail.com
Vectric Apprentice
Posts: 66
Joined: Tue Jan 31, 2012 10:24 pm
Model of CNC Machine: Legacy Maverick 3X5
Location: Sussex, WI
Contact:

Re: Relief carving of Pilsner glass with beer foam

Post by jssussex@gmail.com »

I am looking to make a relief of one side so and so it actually not even a full half but a compressed 3D

User avatar
ohiolyons
Vectric Wizard
Posts: 1702
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Relief carving of Pilsner glass with beer foam

Post by ohiolyons »

2 rail sweep, football from clipart, foam from beer mug from clipart, pixie from clipart
PIXIE PILSNER.jpg
The beer mug has a X in the file name, which means individual components are available, I turned everything off but the foam.
John Lyons
CNC in Kettering, Ohio

User avatar
ohiolyons
Vectric Wizard
Posts: 1702
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Relief carving of Pilsner glass with beer foam

Post by ohiolyons »

So I use Aspire, but also have the demo of VCarvePro to be able to check things out. When I went to VCarvePro the beer mug- x file is not available like it is in Aspire. Are the X versions of files not available to VCarvePro?
John Lyons
CNC in Kettering, Ohio

User avatar
ohiolyons
Vectric Wizard
Posts: 1702
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Relief carving of Pilsner glass with beer foam

Post by ohiolyons »

Just looked at the beer mug file at the windows level and it is a 3dclip file and VCarve can't open these files.
John Lyons
CNC in Kettering, Ohio

User avatar
jssussex@gmail.com
Vectric Apprentice
Posts: 66
Joined: Tue Jan 31, 2012 10:24 pm
Model of CNC Machine: Legacy Maverick 3X5
Location: Sussex, WI
Contact:

Re: Relief carving of Pilsner glass with beer foam

Post by jssussex@gmail.com »

ohiolyons wrote:
Tue Jun 01, 2021 9:53 pm
2 rail sweep, football from clipart, foam from beer mug from clipart, pixie from clipart

PIXIE PILSNER.jpg

The beer mug has a X in the file name, which means individual components are available, I turned everything off but the foam.
I was headed that way but I'm no 3d miracle worker. That was amazing.

User avatar
ohiolyons
Vectric Wizard
Posts: 1702
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Relief carving of Pilsner glass with beer foam

Post by ohiolyons »

John Lyons
CNC in Kettering, Ohio

User avatar
ohiolyons
Vectric Wizard
Posts: 1702
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: Relief carving of Pilsner glass with beer foam

Post by ohiolyons »

John Lyons
CNC in Kettering, Ohio

User avatar
jssussex@gmail.com
Vectric Apprentice
Posts: 66
Joined: Tue Jan 31, 2012 10:24 pm
Model of CNC Machine: Legacy Maverick 3X5
Location: Sussex, WI
Contact:

Re: Relief carving of Pilsner glass with beer foam

Post by jssussex@gmail.com »

thank you

Post Reply