Relief carving of Pilsner glass with beer foam
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
Relief carving of Pilsner glass with beer foam
I'm looking for what I think is referred to a Pilsner glass with a head of foam. A friend wants me to carve one 6 foot tall with a football in the base stem similar to the picture below. If anyone can point me towards one before I start from scratch I would appreciate it.
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Relief carving of Pilsner glass with beer foam
So do you want only half like Design & Make models or are you making a 6' completely round?
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
Re: Relief carving of Pilsner glass with beer foam
I am looking to make a relief of one side so and so it actually not even a full half but a compressed 3D
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Relief carving of Pilsner glass with beer foam
2 rail sweep, football from clipart, foam from beer mug from clipart, pixie from clipart
The beer mug has a X in the file name, which means individual components are available, I turned everything off but the foam.
The beer mug has a X in the file name, which means individual components are available, I turned everything off but the foam.
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Relief carving of Pilsner glass with beer foam
So I use Aspire, but also have the demo of VCarvePro to be able to check things out. When I went to VCarvePro the beer mug- x file is not available like it is in Aspire. Are the X versions of files not available to VCarvePro?
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Relief carving of Pilsner glass with beer foam
Just looked at the beer mug file at the windows level and it is a 3dclip file and VCarve can't open these files.
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
Re: Relief carving of Pilsner glass with beer foam
I was headed that way but I'm no 3d miracle worker. That was amazing.
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Relief carving of Pilsner glass with beer foam
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Relief carving of Pilsner glass with beer foam
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact: