Looking for 3 dimensional 3 D puzzle for Dinosaur similar to what makecnc.com/ offers but I need a 3d of the dino not it's skelleton similar to this
only not just the head.
more like this but not this one.
I need it to use as a frame to put a paper skin on to make a life like dinosaur. I've done a lot of searching but I'm not finding what I need. These will be scaled up to close to life size.
Jim
Need 3d cnc dinosaur puzzle
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
- scotttarnor
- Vectric Wizard
- Posts: 945
- Joined: Fri Aug 30, 2019 11:40 pm
- Model of CNC Machine: Piranha XL , Shark HD520
- Location: La Crosse WI
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
Re: Need 3d cnc dinosaur puzzle
jssussex@gmail.com wrote: ↑Tue May 25, 2021 1:47 pmSorry I wasn't clear I need DXF or other format that I can inport into Aspire and scale up.
Looking for 3 dimensional 3 D puzzle for Dinosaur similar to what makecnc.com/ offers but I need a 3d of the dino not it's skelleton similar to this Screenshot 2021-05-25 074332.jpg
only not just the head.
more like this but not this one.
vectorsart_21211.jpg
I need it to use as a frame to put a paper skin on to make a life like dinosaur. I've done a lot of searching but I'm not finding what I need. These will be scaled up to close to life size.
Jim
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
Re: Need 3d cnc dinosaur puzzle
Sorry I need DXF or similar file not a kit. I'm cutting life size and need simulated bodies not skeleton.scotttarnor wrote: ↑Tue May 25, 2021 2:46 pmhttps://www.amazon.com/Calary-yellow/dp ... 8344&psc=1
https://www.ebay.com/itm/333827495763?_ ... HxEALw_wcB
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Need 3d cnc dinosaur puzzle
Check Thingverse
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Need 3d cnc dinosaur puzzle
Here's one I've had for years. The problem is I can't remember how to put all the parts together. Maybe you can figure it out.
Gary
Gary
- Attachments
-
- Wooden Dinosaur 3D Puzzle.dxf
- (2.25 MiB) Downloaded 97 times
- jssussex@gmail.com
- Vectric Apprentice
- Posts: 66
- Joined: Tue Jan 31, 2012 10:24 pm
- Model of CNC Machine: Legacy Maverick 3X5
- Location: Sussex, WI
- Contact:
Re: Need 3d cnc dinosaur puzzle
I went ahead and developed my own full blown dinosaur, starting with a skeleton model. It's been interesting enlarging the model to 5 and 8 feet. We've also looked at various affordable approaches such a foam boar that are less costly than $80 a sheet plywood.
Re: Need 3d cnc dinosaur puzzle
I think this outrageous inflation that is now going on is going to kill a lot of projects and for that matter, a lot of businesses because people refuse to pay those enormous prices. Of course I can’t talk politics because I might offend somebody's favorite politician.I went ahead and developed my own full blown dinosaur, starting with a skeleton model. It's been interesting enlarging the model to 5 and 8 feet. We've also looked at various affordable approaches such a foam boar that are less costly than $80 a sheet plywood.
Gary