Error No Toolpath Generated

[mtnc100]

I have a simple heart that i an trying to cut out. I get the Error No Toolpath Generated... Check tool can fit. I can cut this out if i choose cut on the line but get the error when i choose cut outside the line. What am i missing.

[Rcnewcomb]

Your vector is open. Zoom into the section at the top-center of the heart shape. There is a gap between the start node and the end node.
Use the tool: Join/Close - vectors by moving end points to a common point

[FixitMike]

The vector is open, not closed. The problem also may have something to do with the fact that the ends are quite close to each other. If the ends are joined, or moved so there is more distance between the ends, the profile will work. But it does appear to be a bug.

[mtnc100]

Thank you both, I thought that i had tried the join/close vectors, but I guess i did not.

[martin54]

Thank you both, I thought that i had tried the join/close vectors, but I guess i did not.

You may have done but it doesn't always join the vectors, it depends on what option you use to join them & how far apart the end nodes are