Sorting/rearranging layers
-
- Vectric Apprentice
- Posts: 52
- Joined: Sun Nov 04, 2012 3:38 pm
- Model of CNC Machine: Joes 4x4 (Modded)
- Location: Georgetown, SC
Sorting/rearranging layers
Is there a way to sort or rearrange layers? I would like to be able to group the layers in the order of the parts of the project.
_______________
Henri
Aspire V10.5, Photo VCarve, Mach3
Henri
Aspire V10.5, Photo VCarve, Mach3
- dealguy11
- Vectric Wizard
- Posts: 2494
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Re: Sorting/rearranging layers
If you open the layer tab, there are arrows at the top that allow you to move items up and down on the list. Just click on the layer name and then on the arrow buttons to move.
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost
-
- Vectric Apprentice
- Posts: 52
- Joined: Sun Nov 04, 2012 3:38 pm
- Model of CNC Machine: Joes 4x4 (Modded)
- Location: Georgetown, SC
Re: Sorting/rearranging layers
Thanks..... Looking in all the wrong places.........
_______________
Henri
Aspire V10.5, Photo VCarve, Mach3
Henri
Aspire V10.5, Photo VCarve, Mach3
-
- Posts: 4
- Joined: Tue Jan 28, 2020 2:11 pm
- Model of CNC Machine: Axiom
- Location: ON, Canada
Re: Sorting/rearranging layers
I wonder if in a future version we would be able to group layers in the same way we can now group tool paths and models? This would be great to help with organizing work.
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Sorting/rearranging layers
I hope so. That would help meFrenchbull wrote: ↑Fri Jun 18, 2021 7:19 amI wonder if in a future version we would be able to group layers in the same way we can now group tool paths and models? This would be great to help with organizing work.
Gary Mitchell
Kentucky, USA
Kentucky, USA
-
- Vectric Craftsman
- Posts: 108
- Joined: Thu Nov 28, 2019 6:12 am
- Model of CNC Machine: Onefinity X-50 Woodworker
- Location: Fresno, CA
Re: Sorting/rearranging layers
I 100% agree on a system for grouping and managing layers
- dealguy11
- Vectric Wizard
- Posts: 2494
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Re: Sorting/rearranging layers
Best way to try to get it on Vectric's radar is to submit a feature request to support@vectric.com. If enough of you make the request it may get their attention,
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost
-
- Posts: 4
- Joined: Tue Jan 28, 2020 2:11 pm
- Model of CNC Machine: Axiom
- Location: ON, Canada
Re: Sorting/rearranging layers
Thanks, will do