Aspire ver 11
Aspire ver 11
Just a quickie. I currently have VCarve desktop and want to upgrade to Aspire. I am guessing that version 11 will be here in the next couple of months. if I were to purchase 10.5 now would I get an upgrade to version 11 or would I have to purchase the upgrade?
-
- Vectric Wizard
- Posts: 520
- Joined: Sun May 03, 2015 12:25 pm
- Model of CNC Machine: Axiom AR8
- Location: Savannah, GA
Re: Aspire ver 11
From the Vectric website:
Free Minor Upgrades
Any major version of the software released within 12 months of you purchasing the software is supplied free of charge and available from your V&Co account.
Minor updates are always free to anyone who has the same major version (e.g V10.5 would be free to all owners of V10.0 software).
You can upgrade to the latest version of the software for the same price, regardless of the version you are currently running. For example, the price to upgrade to the latest version of the software if the same, regardless of whether you are upgrading from version 4.0 or 8.0.
Free Minor Upgrades
Any major version of the software released within 12 months of you purchasing the software is supplied free of charge and available from your V&Co account.
Minor updates are always free to anyone who has the same major version (e.g V10.5 would be free to all owners of V10.0 software).
You can upgrade to the latest version of the software for the same price, regardless of the version you are currently running. For example, the price to upgrade to the latest version of the software if the same, regardless of whether you are upgrading from version 4.0 or 8.0.
Re: Aspire ver 11
Thank-youSavannahdan wrote: ↑Sat Dec 12, 2020 1:01 pmFrom the Vectric website:
Free Minor Upgrades
Any major version of the software released within 12 months of you purchasing the software is supplied free of charge and available from your V&Co account.
Minor updates are always free to anyone who has the same major version (e.g V10.5 would be free to all owners of V10.0 software).
You can upgrade to the latest version of the software for the same price, regardless of the version you are currently running. For example, the price to upgrade to the latest version of the software if the same, regardless of whether you are upgrading from version 4.0 or 8.0.
- ohiolyons
- Vectric Wizard
- Posts: 1710
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Aspire ver 11
Based on previous history you can't expect 11 until the Sept timeframe.
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
Re: Aspire ver 11
I purchased 10.5 on September 23, 2020 and need to start saving for the upgrade. What will 11 cost me?
Thanks
Ron Hampe
Thanks
Ron Hampe
[url=http://drugstore-onlinecatalog.com/]drugstore-onlinecatalog.com[/url]
- dealguy11
- Vectric Wizard
- Posts: 2487
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Re: Aspire ver 11
Based on the upgrade policy, if it comes out before September 23 then the price should be zero, if you actually purchased it. Otherwise I think prior major upgrades (which this is) are around $400.
Did you actually purchase 10.5? That was a point release. If not, then it's the $400 (or whatever the price is this year).
Did you actually purchase 10.5? That was a point release. If not, then it's the $400 (or whatever the price is this year).
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost