I have been using V 10.022 since it was released. I was reviewing the What's New and the help ? options. I noticed that I do not have some of the options, like the use of multiple clearance tools. The update tells me I have the latest version. Could I have missed some part of the installation or put something somewhere the system can't find it?
Any suggestions?
TIA
Al Allison
V 10 updates
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: V 10 updates
Hi,
Be sure you have the “Show Advanced Toolpath Options” box checked (active). You should see all the options if that is done.
Be sure you have the “Show Advanced Toolpath Options” box checked (active). You should see all the options if that is done.
Last edited by mtylerfl on Sat May 23, 2020 3:31 pm, edited 1 time in total.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: V 10 updates
Do you have USE CLEARANCE TOOLS?
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: V 10 updates
Michael,
Thank you for the reply. I do have that checked, and I have tried un-checking and re-checking and so on but the option to add more tools is not there.
Al
Thank you for the reply. I do have that checked, and I have tried un-checking and re-checking and so on but the option to add more tools is not there.
Al
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: V 10 updates
gcas,
Yes, I have that checked
Al
Yes, I have that checked
Al
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: V 10 updates
What toolpath type are you trying to use? Gerry showed a screenshot of the VCarve/Engraving Toolpath - is that the one you are missing the clearance tools options? Do you have a vector(s) already selected prior to trying to create a toolpath?
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: V 10 updates
Build 5975.6691.1077 for Apr 22,2020
Full licensed versions
Al
It is pocket tool path for an existing job, created since the update. I was reading the What's New on the Vectric site and did not remember seeing it, so I opened the project and the option to put in additional tools and move them up or down is not there.
Full licensed versions
Al
It is pocket tool path for an existing job, created since the update. I was reading the What's New on the Vectric site and did not remember seeing it, so I opened the project and the option to put in additional tools and move them up or down is not there.
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: V 10 updates
Yes, the vectors were selected, the toolpath was created and it ll looks right. it just does not show me the new options.
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: V 10 updates
Multiple Clearance Tools are not currently available for Pocket Toolpaths. Do you see the options for a VCarve/Engraving Toolpath, though? (If so, FixitMike posted a “hack” awhile ago for fooling the software to do pockets with multiple clearance tools.)Al Allison wrote: ↑Sat May 23, 2020 3:47 pmYes, the vectors were selected, the toolpath was created and it ll looks right. it just does not show me the new options.
viewtopic.php?f=2&t=33603&p=244545#p244545
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 38
- Joined: Sat Nov 01, 2014 1:59 pm
- Model of CNC Machine: Shop Sabre 4896
Re: V 10 updates
OK, Michael, that was my problem! Thanks. I will check out FixitMike's method.