Calling all Vectricians for our COMPETITION - Operation SMILE
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Thank you so much to those of you who have submitted your entries in to our competition, we are absolutely loving all of your projects.
This is a last call to anyone who would like to submit their project into the competition. The deadline is the end of today!
Tomorrow we will be announcing the top 3 projects, as voted by the whole Vectric team. Then it will be down to you guys to choose the winner.
We can't wait!
Stay safe and healthy
This is a last call to anyone who would like to submit their project into the competition. The deadline is the end of today!
Tomorrow we will be announcing the top 3 projects, as voted by the whole Vectric team. Then it will be down to you guys to choose the winner.
We can't wait!
Stay safe and healthy
- rtibbs
- Vectric Wizard
- Posts: 411
- Joined: Mon Nov 12, 2018 11:15 pm
- Model of CNC Machine: Shopbot desktop
- Location: Central Florida
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
We can’t either
Thank you Vectric Team for putting this on
Thank you Vectric Team for putting this on
-
- Posts: 32
- Joined: Wed Nov 29, 2017 9:47 pm
- Model of CNC Machine: Raw 1.5
- Location: Umea Sweden
- Contact:
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Something that can make me and many others smile is food. And in these times of isolation it can be important to do nice things together. That's why I came up with this ravioli/pasta mold that can also be a perfect gift for your neighbors and fellow people. And instead of hoarding pasta, do it together with your family its both good and fun! // Eric
-
- Vectric Wizard
- Posts: 594
- Joined: Wed Sep 28, 2016 10:19 pm
- Model of CNC Machine: Xcarve
- Location: Columbus Ohio
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Very nice work.
What kind of wood did you use for the pasta molds?
What kind of wood did you use for the pasta molds?
“I've learned so much from my mistakes, I'm thinking of making a few more”
-
- Posts: 32
- Joined: Wed Nov 29, 2017 9:47 pm
- Model of CNC Machine: Raw 1.5
- Location: Umea Sweden
- Contact:
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Thanks Jan!Jan.vanderlinden wrote: ↑Wed Apr 22, 2020 6:54 pmVery nice work.
What kind of wood did you use for the pasta molds?
It's mango wood from a IKEA chopping board. Easy for anyone to find and buy https://www.ikea.com/gb/en/p/fascinera- ... -60393486/
-
- Posts: 26
- Joined: Sat Mar 21, 2020 8:18 pm
- Model of CNC Machine: Shapeoko 3 xxl
- Location: Fairfield California
- Contact:
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Here is my last job, a complete set of 26 letter woodcuts in the Florentine style from the late Middle Age / Early Renaissance. I redraw those letters in Adobe Illustrator and saved them in EPS and SVG formats, All of them have been cut and tested in VCarve Pro with a 30 degrees V bit with a base of 0.2mm, can also successfully be cut with a 60 degree v bit.
It is a nice set of capital letters that can be used in many different projects. They may put a smile in the face of the Vectricians that download them.
I am working now on three more sets of woodcut capital letters.
It is a nice set of capital letters that can be used in many different projects. They may put a smile in the face of the Vectricians that download them.
I am working now on three more sets of woodcut capital letters.
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
I tried to upload this last night - but I couldn't get the account activated quickly enough to make the deadline. The good folks at Vectric approved the account as soon as they could - but alas, sleep was needed, and now it's the 23rd!
Attached are a couple of photos for consideration.
I have 6 of these plaques on my machine now just waiting to get their detail passes. I will follow up when I have the final products finished
Attached are a couple of photos for consideration.
I have 6 of these plaques on my machine now just waiting to get their detail passes. I will follow up when I have the final products finished
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
And the winner is...
Thank you to everyone who entered our Operation Smile competition by submitting a project to make our community smile. We asked our community to choose their favourite. Congratulations Scott Rathburn your backgammon project has been voted the winner of our competition! Scott has kindly agreed to make the project files available to our community. Watch for them in the coming week.
Thank you to everyone who entered our Operation Smile competition by submitting a project to make our community smile. We asked our community to choose their favourite. Congratulations Scott Rathburn your backgammon project has been voted the winner of our competition! Scott has kindly agreed to make the project files available to our community. Watch for them in the coming week.
-
- Posts: 2
- Joined: Mon May 04, 2020 8:16 pm
- Model of CNC Machine: Gatton CNC
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
My wife saw the backgammon board and wants us to make one. Has Scott uploaded the files somewhere?
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Hi DaveInConesus,DaveInConesus wrote: ↑Thu May 07, 2020 4:28 pmMy wife saw the backgammon board and wants us to make one. Has Scott uploaded the files somewhere?
You can find the free project files here: https://www.vectric.com/vectric-communi ... XcoOKnNeXA
Enjoy!
Thanks
-
- Posts: 2
- Joined: Mon May 04, 2020 8:16 pm
- Model of CNC Machine: Gatton CNC
Re: Calling all Vectricians for our COMPETITION - Operation SMILE
Thanks, I hadn't thought to look in the community files.
Dave
Dave