Aligning Single Clipart to Curve
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Aligning Single Clipart to Curve
I know that you can use "Copy Along Vectors" to place multiple copies of an object along a curve but instead, I want to take a single elongated object and form it to the shape of the curve (see attached picture - want weave to take the shape of the curve). I've been using distort object to accomplish the task but I would like to know if there is a more automated way to accomplish the task?
Thanks,
Mark
Thanks,
Mark
- ohiolyons
- Vectric Wizard
- Posts: 1714
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Aligning Single Clipart to Curve
You should look at Extrude and Weave.
Create your weave first and then extrude that along your vector.
Create your weave first and then extrude that along your vector.
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Aligning Single Clipart to Curve
I don't want 3D, instead a V-carved design.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Aligning Single Clipart to Curve
Yes, that is the way I have been doing it. I'm looking for an automated method similar to text on a curve.highpockets wrote:Have you tried Distort Selected Object?
Mark
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Aligning Single Clipart to Curve
Sorry, I don't have a file. This is an academic question only.ohiolyons wrote:could you post your file?
Mark
- ohiolyons
- Vectric Wizard
- Posts: 1714
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Aligning Single Clipart to Curve
He said he was using Distort Objects.
Not certain how much automated you could want. Explain please?
You select the clipart, then a vector and press apply and it is distorted.
I guess the answer to your original question is No.
Not certain how much automated you could want. Explain please?
You select the clipart, then a vector and press apply and it is distorted.
I guess the answer to your original question is No.
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Aligning Single Clipart to Curve
Whoops!!!Mark's Wood Chips wrote:Yes, that is the way I have been doing it. I'm looking for an automated method similar to text on a curve.highpockets wrote:Have you tried Distort Selected Object?
Mark
John
Maker of Chips
Maker of Chips
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Aligning Single Clipart to Curve
That's my conclusion as well.ohiolyons wrote: I guess the answer to your original question is No.
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Aligning Single Clipart to Curve
The practical application to my question was designing a smooth flowing V-Carve on a gently curved walking stick. The weave pattern stick has the series of weaves stacked end to end. Each individual weave pattern is straight, I wanted it to follow more closely to the actual curve of the stick. It's acceptable the way it turned out but I was hoping to soak up some greater wisdom from my friends on this forum .
Mark
Mark
-
- Vectric Apprentice
- Posts: 73
- Joined: Sat Jun 18, 2011 2:44 am
- Model of CNC Machine: Shark Pro Plus
Re: Aligning Single Clipart to Curve
Did you use the Distort Object function Between Two Vectors? Here are a couple of pictures of distorting a weave pattern between two vectors.
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Aligning Single Clipart to Curve
No, I haven't tried that - thanks for the suggestion.
Mark
Mark
- Adrian
- Vectric Archimage
- Posts: 14680
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Aligning Single Clipart to Curve
I'm confused now. Using the Distort Objects was suggested earlier in the thread and you said you were already doing it that way.
-
- Vectric Wizard
- Posts: 411
- Joined: Thu Apr 06, 2017 3:07 am
- Model of CNC Machine: Camaster Stinger SR24
- Location: Addison, PA
Re: Aligning Single Clipart to Curve
Im not smart enough to solve your dilemma, but those are some sweet looking walking sticks!
Joe
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.
I have a chip on my shoulder....several more in my hair and lots more all over my shop floor.