Discounts
-
- Posts: 14
- Joined: Tue Nov 27, 2018 1:27 am
- Model of CNC Machine: I2R8
Discounts
Does Vectric ever have a sale? I'm ready to update to Aspire, and can afford it but boy could I use a break on that $1300 price tag!
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- martin54
- Vectric Archimage
- Posts: 7354
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Discounts
+1 on what John said, never seen one in the time I have been using the software
- TReischl
- Vectric Wizard
- Posts: 4655
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Discounts
Not in the 12 years I have been using it.
I have never had a good opinion of sales. All sorts of annoying things happen. First, if I need something right away and cannot wait for a "sale" then when something goes on sale a month later I feel like I was ripped off. Or one can sit around waiting for a "sale" to happen which is not pleasant either. Finally, if a company can sell something at a sale price how come it has to be more expensive the rest of the time?
Sales make sense to me when a company is clearing out stock of an item they will no longer sell.
I have never had a good opinion of sales. All sorts of annoying things happen. First, if I need something right away and cannot wait for a "sale" then when something goes on sale a month later I feel like I was ripped off. Or one can sit around waiting for a "sale" to happen which is not pleasant either. Finally, if a company can sell something at a sale price how come it has to be more expensive the rest of the time?
Sales make sense to me when a company is clearing out stock of an item they will no longer sell.
"If you see a good fight, get in it." Dr. Vernon Johns
- Leo
- Vectric Wizard
- Posts: 4091
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Discounts
I have never seen a "sale" price.
In comparison to other competitive pricing for other vendors, the price IS very good for what you get.
Keep in mind, that aspire vs vcarve pro, is all about the model creation.
Make sure you look at the product comparison chart to see the differences.
In comparison to other competitive pricing for other vendors, the price IS very good for what you get.
Keep in mind, that aspire vs vcarve pro, is all about the model creation.
Make sure you look at the product comparison chart to see the differences.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Discounts
The difference between a man and a woman?
A man will buy a $1 dollar item for $2 dollars if he really wants it.
A woman will buy a $2 dollar item for $1 dollar even if she doesn't want it.
I don't wait for sales either. If I want it and need it I'll buy it.
A man will buy a $1 dollar item for $2 dollars if he really wants it.
A woman will buy a $2 dollar item for $1 dollar even if she doesn't want it.
I don't wait for sales either. If I want it and need it I'll buy it.
Steve
-
- Vectric Craftsman
- Posts: 181
- Joined: Thu Oct 14, 2010 2:40 pm
- Model of CNC Machine: Hybrid re-build
- Location: Derbyshire UK
Re: Discounts
“It´s unwise to pay too much, or to pay too little.
When you pay too much you lose a little money, but that is all.
When you pay too little, you might lose a whole lot more, the respect that you crave, the understanding of the person you deal with.
If you have to deal with a lowest bidder, it´s well to add something extra for the risk you run.
And if you do that, you will have enough to pay for something better.
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey”.
John Ruskin – 1819-1900
When you pay too much you lose a little money, but that is all.
When you pay too little, you might lose a whole lot more, the respect that you crave, the understanding of the person you deal with.
If you have to deal with a lowest bidder, it´s well to add something extra for the risk you run.
And if you do that, you will have enough to pay for something better.
There is scarcely anything in the world that some man cannot make a little worse, and sell a little more cheaply. The person who buys on price alone is this man's lawful prey”.
John Ruskin – 1819-1900
A person who works with his hands, his brain and his heart is an artist"
—Louis Nizer
—Louis Nizer
- dealguy11
- Vectric Wizard
- Posts: 2493
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510,24x48 GCnC/WinCNC
- Location: Henryville, PA
Re: Discounts
That quote just went on my wall.
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost
- ohiolyons
- Vectric Wizard
- Posts: 1714
- Joined: Wed May 27, 2009 7:16 pm
- Model of CNC Machine: Laguna IQ
- Location: Kettering, Ohio
Re: Discounts
You are overlooking the biggest discount.
Vectric allows to you trade in your current Vectric product and not pay the full cost of newer software.
They should be congratulated for doing this, not criticized for no discounts.
When was they last time Microsoft or any other software company did this for an upgrade?
Vectric allows to you trade in your current Vectric product and not pay the full cost of newer software.
They should be congratulated for doing this, not criticized for no discounts.
When was they last time Microsoft or any other software company did this for an upgrade?
John Lyons
CNC in Kettering, Ohio
CNC in Kettering, Ohio
- TReischl
- Vectric Wizard
- Posts: 4655
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Discounts
What I really like about Vectric not having sales is:
Not being bombarded with BS emails telling me what a great deal I am missing. Or annoying pop ups that some clown thought was the best idea since sliced bread.
Not being bombarded with BS emails telling me what a great deal I am missing. Or annoying pop ups that some clown thought was the best idea since sliced bread.
"If you see a good fight, get in it." Dr. Vernon Johns
-
- Posts: 14
- Joined: Tue Nov 27, 2018 1:27 am
- Model of CNC Machine: I2R8
Re: Discounts
While I appreciate all the replies to my question, I don't understand the opinions and gender references. While just like that void in our rear, we all have opinions. Whether I'm a male or female I don't believe it determines my desire to get the best posable deal. Using the "no question is a stupid question' philosophy, ( I know some here don't ascribe to that thought ), I asked for and received a discount on my last CNC purchase. The company replied to me with an offer to sell me a prototype stand that functioned just as well as the production one for half price. I saved $250 all with my male anatomy intact. Oh, and the wife thought it was a good deal too![/b][/b]
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Discounts
I wasn't trying to be derogatory. Although, it may have been a bit facetious. My apology if I offended anyone.
Steve
Re: Discounts
I think you were a little off. It should of said "A Woman will buy a $2 item for $50 even if she doesn't want it". Just kidding, I was thinking of my wife.A man will buy a $1 dollar item for $2 dollars if he really wants it.
A woman will buy a $2 dollar item for $1 dollar even if she doesn't want it.
- TReischl
- Vectric Wizard
- Posts: 4655
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: Discounts
Something tells me that I will not be "woke" before I "croak".
"If you see a good fight, get in it." Dr. Vernon Johns