Design and Make Question
-
- Posts: 14
- Joined: Sun Jul 15, 2018 11:15 pm
- Model of CNC Machine: Camaster stinger
Design and Make Question
I am sorry if I have posted this in the wrong location, I have a question about a design and make download Model 50154. Can I remove the "banners" on the top and bottom section of the model? I am wondering if I can move things around or remove them? I wanted to remove the "F" and the "D" and change them, but I think when I select anything on the model it selects the entire model. This is probably a very basic question but I am a beginner. Thanks for the help.
- mtylerfl
- Vectric Archimage
- Posts: 5892
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Design and Make Question
In case someone from Design&Make doesn't see this post, you can contact them directly:
support@designandmake.com
support@designandmake.com
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- Adrian
- Vectric Archimage
- Posts: 14651
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Design and Make Question
Which software do you have? VCarve or Aspire?
The Fire Dept cross is a one piece model so you can't move things around. There are ways of limiting what is machined in both VCarve and Aspire. In Aspire you can cut the model up and change parts of it with modelling tools but they aren't beginner topics really.
Have you worked your way through the tutorial videos?
The Fire Dept cross is a one piece model so you can't move things around. There are ways of limiting what is machined in both VCarve and Aspire. In Aspire you can cut the model up and change parts of it with modelling tools but they aren't beginner topics really.
Have you worked your way through the tutorial videos?
-
- Posts: 14
- Joined: Sun Jul 15, 2018 11:15 pm
- Model of CNC Machine: Camaster stinger
Re: Design and Make Question
I have worked through some of the tutorials, probably just too excited and getting ahead of myself. I have aspire software current version.