Thank you Leo, well stated......Leo wrote:I will just be patient.
I am sure that Vectric has a LOT of money tied up in this release. I am sure that they NEED the money from an upgrade to cover their costs.
They have plenty of incentive to release it.
I have had software that needed repair plugs after release and I don't like that.
Vectric is going to release.
There has been NO release DATES to my knowledge - they are NOT past due on anything.
Patience - Patience.
Don't force Vectric into something that we will all regret afterwards.
Aspire 9
-
- Vectric Craftsman
- Posts: 103
- Joined: Sun Feb 05, 2012 4:40 am
- Model of CNC Machine: Home built wooden machine - Mach3/Aspire
- Location: Fort Wayne, Indiana
Re: Aspire 9
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Re: Aspire 9
Thank you all for your patience. I can assure you that the staff at Vectric have been working extremely hard to get not just the program but the support materials, marketing materials and internal systems ready for this release.plcamp wrote:Thank you Leo, well stated......Leo wrote:I will just be patient.
I am sure that Vectric has a LOT of money tied up in this release. I am sure that they NEED the money from an upgrade to cover their costs.
They have plenty of incentive to release it.
I have had software that needed repair plugs after release and I don't like that.
Vectric is going to release.
There has been NO release DATES to my knowledge - they are NOT past due on anything.
Patience - Patience.
Don't force Vectric into something that we will all regret afterwards.
However
http://forum.vectric.com/viewtopic.php?f=27&t=27696
Thanks again
Brian
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Aspire 9
Just ONE more time ---- you guys are AWESOME
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 21, 2009 8:22 pm
- Model of CNC Machine: ShopBot Buddy Standard
- Location: Marietta, GA.
Re: Aspire 9
Thanks, Mark. Looking forward to seeing you-all (y'all in Southern) in Las Vegas this fall...joe
-
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 21, 2009 8:22 pm
- Model of CNC Machine: ShopBot Buddy Standard
- Location: Marietta, GA.
Re: Aspire 9
Just downloaded V9! Now to start a new project...joe
-
- Vectric Craftsman
- Posts: 103
- Joined: Sun Feb 28, 2016 5:48 pm
- Model of CNC Machine: Laguna IQ
- Location: Arizona
- Contact:
Re: Aspire 9
Here is another vid from YTube-
-
- Vectric Apprentice
- Posts: 57
- Joined: Sat Jan 12, 2013 1:01 pm
- Model of CNC Machine: Wabeco F1410 LF-C HS; Sorotec AL1110
- Location: Wurmberg, Germany
Re: Aspire 9
Hi all,
same question as allway: can I install Aspire 9.0 in parallel to the existing version 8.5? Maybe there are still som bugs ...
Greetings
Klaus
same question as allway: can I install Aspire 9.0 in parallel to the existing version 8.5? Maybe there are still som bugs ...
Greetings
Klaus
- Adrian
- Vectric Archimage
- Posts: 14684
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Aspire 9
Yes you can install it alongside 8.5 with no interference. Hopefully there aren't any bugs, myself and the other beta testers have been trying hard for a while to find them all but you never know.
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Aspire 9
Just remember that the software is not backward compatible so any files you have saved using V9 will not open in 8.5vip-klaus wrote:Hi all,
same question as allway: can I install Aspire 9.0 in parallel to the existing version 8.5? Maybe there are still som bugs ...
Greetings
Klaus
-
- Vectric Craftsman
- Posts: 103
- Joined: Sun Feb 28, 2016 5:48 pm
- Model of CNC Machine: Laguna IQ
- Location: Arizona
- Contact:
Re: Aspire 9
V9 For now I am trying the trial version- kudo's. My likes are similar to those above, especially the Layers location. On the dislikes side No additional clip art, added.
If we are too positive they might increase their already reasonabally priced upgrade of $400 (usd) Oh well......
If we are too positive they might increase their already reasonabally priced upgrade of $400 (usd) Oh well......
- IslaWW
- Vectric Wizard
- Posts: 1403
- Joined: Wed Nov 21, 2007 11:42 pm
- Model of CNC Machine: CNC Controller Upgrades
- Location: Bergland, MI, USA
Re: Aspire 9
My downloads included nearly 50 MB of "V9" additional clipart
Gary Campbell
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
GCnC Control
ATC & Servo Controller Controller Upgrades
GCnC411 (at) gmail.com
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Aspire 9
+1IslaWW wrote:My downloads included nearly 50 MB of "V9" additional clipart
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- Adrian
- Vectric Archimage
- Posts: 14684
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Aspire 9
It's on the portal download page with all the other clipart and the main program.
-
- Vectric Apprentice
- Posts: 85
- Joined: Sun Nov 10, 2013 8:05 pm
- Model of CNC Machine: CAMaster Stinger 1
- Location: Louisiana
Re: Aspire 9
I also did not see any additional clipart. On my portal download page, it has the V9 3D Tabs Clipart listed, but
does not show the V9 additional clipart as in the attachment that Adrian posted. I tried to post a picture of what
is available in my portal download page, but it will not let me. Am I missing something??
How can I get the additional clipart??
Bobby
does not show the V9 additional clipart as in the attachment that Adrian posted. I tried to post a picture of what
is available in my portal download page, but it will not let me. Am I missing something??
How can I get the additional clipart??
Bobby