V9 where are you????
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: V9 where are you????
Randall,
I am sooo stealing that PICNIC idea! I have a number of people who ask for computer help and that pretty much describes them... Maybe I'll make up a little picnic table that will hold business cards or something.
I am sooo stealing that PICNIC idea! I have a number of people who ask for computer help and that pretty much describes them... Maybe I'll make up a little picnic table that will hold business cards or something.
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Re: V9 where are you????
Yep, I was in IT for 27 years and I thought I've heard them all but that is the first I've heard of the PICNIC error. Love it. My favorite is the ID 10 T error. Lol
Andy B.
Andy B.
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
- andyb
- Vectric Wizard
- Posts: 301
- Joined: Fri Jun 02, 2006 2:11 am
- Model of CNC Machine: MultiCAM, Shopbot PRTAlpha
- Location: Oakwood, GA
- Contact:
Re: V9 where are you????
Yep, I was in IT for 27 years and I thought I've heard them all but that is the first I've heard of the PICNIC error. Love it. My favorite is the ID 10 T error. Lol
Andy B.
Andy B.
[b]Oak Branch Manufacturing[/b]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
andy@oakbranchmfg.com
678-971-5502
[url]http://www.oakbranchmfg.com[/url]
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: V9 where are you????
Mike & Andy, you both need to spend more time reading the forum, it was mentioned way back in 2011
Mike you could have made millions by now if you had set up your add campaign back then
http://forum.vectric.com/viewtopic.php? ... ror#p79633
Mike you could have made millions by now if you had set up your add campaign back then
http://forum.vectric.com/viewtopic.php? ... ror#p79633
- backyard_cnc
- Vectric Craftsman
- Posts: 237
- Joined: Mon Aug 31, 2009 4:41 am
- Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE
- Location: winnipeg, manitoba, Canada
Re: V9 where are you????
What good is $400 if not to spend it on something? Especially something as worthwhile as the latest version of ASPIRE!mikeacg wrote:I'm torn between wanting a new version RIGHT NOW and hanging on to my $400 for another day or two...
Mike
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: V9 where are you????
Oh, don't worry - they're going to get my $400 but I'd like to learn everything about the last version before I give it to them!!!!
-
- Vectric Wizard
- Posts: 482
- Joined: Tue Feb 03, 2009 5:00 am
- Model of CNC Machine: Joes Evo 3x2
- Location: Ocala, FL
- Contact:
Re: V9 where are you????
If I took that attitude I'd probably still be on 1.0.mikeacg wrote:Oh, don't worry - they're going to get my $400 but I'd like to learn everything about the last version before I give it to them!!!!
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: V9 where are you????
I bought version 1.0, sight-unseen, as soon as I heard about what it offered. I haven't missed an upgrade yet - but I just HATE parting with the money...
-
- Vectric Wizard
- Posts: 349
- Joined: Sun Nov 19, 2006 2:20 am
- Location: Michigan
Re: V9 where are you????
All I would like to know is,
Will it still install/work on XP?
b.
Will it still install/work on XP?
b.
- Adrian
- Vectric Archimage
- Posts: 14543
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: V9 where are you????
Still works on XP.
Some teaser video on Vectrics FaceBook and Twitter as well.
Some teaser video on Vectrics FaceBook and Twitter as well.
- Rcnewcomb
- Vectric Archimage
- Posts: 5886
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: V9 where are you????
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 19
- Joined: Sat Sep 26, 2009 5:29 pm
- Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
- Location: Chemainus, BC, Canada
Re: V9 where are you????
MMMMmmmmmmmm...
The Vectric Website goes down for 24 hours at 5:00PM GMT today (13th)
I'm a Government Programmer/Web Developer and I smell a product launch.
When you want to change dozens and dozens of pages all at once for a new product the best way is to take the whole site down for Maintenance.
So my guess is that tomorrow the website will feature V9 with a launch date or possibly tomorrow is the day!
The Vectric Website goes down for 24 hours at 5:00PM GMT today (13th)
I'm a Government Programmer/Web Developer and I smell a product launch.
When you want to change dozens and dozens of pages all at once for a new product the best way is to take the whole site down for Maintenance.
So my guess is that tomorrow the website will feature V9 with a launch date or possibly tomorrow is the day!
- backyard_cnc
- Vectric Craftsman
- Posts: 237
- Joined: Mon Aug 31, 2009 4:41 am
- Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE
- Location: winnipeg, manitoba, Canada
Re: V9 where are you????
yup that was my first thought as well! very excited to see!!
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: V9 where are you????
Rick Hubka wrote:MMMMmmmmmmmm...
The Vectric Website goes down for 24 hours at 5:00PM GMT today (13th)
I'm a Government Programmer/Web Developer and I smell a product launch.
When you want to change dozens and dozens of pages all at once for a new product the best way is to take the whole site down for Maintenance.
So my guess is that tomorrow the website will feature V9 with a launch date or possibly tomorrow is the day!
The website isn't going down...just the Customer Portal.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- backyard_cnc
- Vectric Craftsman
- Posts: 237
- Joined: Mon Aug 31, 2009 4:41 am
- Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE
- Location: winnipeg, manitoba, Canada
Re: V9 where are you????
yes but don't all the downloads come thru the customer portal?