Vectric Aspire version 4.0?
Vectric Aspire version 4.0?
Heard that Aspire Version 4.0 was due out in January, then heard it was February.
What is the status of this?
What is the status of this?
-
- Vectric Wizard
- Posts: 862
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: Vectric Aspire version 4.0?
They have always stated they where trying to get it out by then, sometimes it works out and some time it don't. I understand that the Feb release is still in the realm of possibilities. So I guess when it comes out it will, and if it don't it will be well worth the wait.
Bob
Bob
-
- Vectric Craftsman
- Posts: 298
- Joined: Thu Dec 18, 2008 3:05 am
Re: Vectric Aspire version 4.0?
Is there a post that describes some of the features built into the new version?
Thanks
Thanks
- Adrian
- Vectric Archimage
- Posts: 14683
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Vectric Aspire version 4.0?
http://www.vectric.com/forum/viewtopic. ... 0&start=52
There have been a few others about things like being able to import vectors from VCarve/Aspire files and being able to save VCarve format files from Aspire.
There have been a few others about things like being able to import vectors from VCarve/Aspire files and being able to save VCarve format files from Aspire.
-
- Vectric Craftsman
- Posts: 298
- Joined: Thu Dec 18, 2008 3:05 am
Re: Vectric Aspire version 4.0?
Thanks much, Adrian...
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Vectric Aspire version 4.0?
Being able to save v-carve - (cut3D?) - from Aspire would be AWESOME - I could send stuff to my friend in California - all rights preserved of course.Adrian wrote:http://www.vectric.com/forum/viewtopic. ... 0&start=52
There have been a few others about things like being able to import vectors from VCarve/Aspire files and being able to save VCarve format files from Aspire.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- CountryWoodCrafts
- Vectric Craftsman
- Posts: 225
- Joined: Sun Aug 29, 2010 1:42 am
- Model of CNC Machine: Shark Pro HD & Pro Plus Long Beds
- Location: Maggie Valley, N.C. 28751
- Contact:
Re: Vectric Aspire version 4.0?
@ Version 3.5 . . . . .
You want it when LOL
http://www.facebook.com/country.wood.cr ... .furniture
http://www.facebook.com/country.wood.cr ... .furniture
- Jason Jones
- Vectric Apprentice
- Posts: 62
- Joined: Tue Jun 05, 2012 6:01 pm
- Model of CNC Machine: Hytek Tools SignTEK & ATCTEK
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Re: Vectric Aspire version 4.0?
Hi,
The updates to 4.0 will not be handled via the 'Check For Updates' mechanism in V3, as that is for updating Version 'X' to the latest version of Version 'X' not for upgrading to a new major version.
Version 4 will require new codes, and we will be sending emails to all registered Aspire users with details on the upgrade as soon as it is available (we are all typing as quickly as we can here at Vectric )
Brian
The updates to 4.0 will not be handled via the 'Check For Updates' mechanism in V3, as that is for updating Version 'X' to the latest version of Version 'X' not for upgrading to a new major version.
Version 4 will require new codes, and we will be sending emails to all registered Aspire users with details on the upgrade as soon as it is available (we are all typing as quickly as we can here at Vectric )
Brian
Re: Vectric Aspire version 4.0?
Use all 10 fingers, not like me, just my index fingers!BrianM wrote:Hi,
(we are all typing as quickly as we can here at Vectric )
Brian
Re: Vectric Aspire version 4.0?
If I change my username to AAAAAAAAAAAAAAArdvark, will I get mine first?
- BrianM
- Vectric Staff
- Posts: 1964
- Joined: Mon May 16, 2005 10:15 am
- Model of CNC Machine: A few ...
- Location: Alcester U.K
- Contact:
Re: Vectric Aspire version 4.0?
We will probably do it in reverse alphabetical order thenTimvmax wrote:If I change my username to AAAAAAAAAAAAAAArdvark, will I get mine first?
- rscrawford
- Vectric Wizard
- Posts: 1104
- Joined: Mon Jan 17, 2011 6:49 pm
- Model of CNC Machine: CAMaster Cobra 408 ATC, ShopSabre IS408
- Location: Wetaskiwin, Alberta
- Contact:
Re: Vectric Aspire version 4.0?
AAAAAAAAAAAardvark ZZZZZZZZZZzelmanow
Russell Crawford
http://www.cherryleaf-rustle.com
http://www.cherryleaf-rustle.com
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: Vectric Aspire version 4.0?
Does that mean I will be one of the last ones to get it?
Wolffie
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Re: Vectric Aspire version 4.0?
Does anyone know if there will be any upgrades to the Wrapping Gadgets?