Looking for a model
Looking for a model
I'm working on a project for my niece and
she wants a S curve. I'm sure there is a
proper name for it. I inquired at Design and
Make and they don't have one.
Just wondering if any of you might know where
I could get one. Picture attached.
Thanks for any help!
olf20 / Bob
she wants a S curve. I'm sure there is a
proper name for it. I inquired at Design and
Make and they don't have one.
Just wondering if any of you might know where
I could get one. Picture attached.
Thanks for any help!
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
-
- Posts: 15
- Joined: Fri Jan 28, 2022 5:15 pm
- Model of CNC Machine: Shapeoko Pro XXL
- Location: Southeast VA
Re: Looking for a model
I don't know for sure, but is that called a scrolled figure?
- FabLab Wageningen
- Vectric Craftsman
- Posts: 214
- Joined: Mon May 09, 2022 8:17 pm
- Model of CNC Machine: Ooznest Workbee 1500x1500
- Location: Wageningen, Netherlands
- Contact:
Re: Looking for a model
I'm happy to give you one in 2D, but not in 3D, unfortunately. Give a yell if you're interested.
Marcel.
Marcel.
Re: Looking for a model
I would say yes but after looking on the web for
sometime, it seems that the wording is somewhat
generic. Lots of different shapes called the same
thing.
Thanks for the reply!!
olf20 / Bob
sometime, it seems that the wording is somewhat
generic. Lots of different shapes called the same
thing.
Thanks for the reply!!
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
Re: Looking for a model
Thanks for your kind offer, but I need a 3d model.FabLab Wageningen wrote: ↑Wed Jan 11, 2023 8:47 pmI'm happy to give you one in 2D, but not in 3D, unfortunately. Give a yell if you're interested.
Marcel.
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- FabLab Wageningen
- Vectric Craftsman
- Posts: 214
- Joined: Mon May 09, 2022 8:17 pm
- Model of CNC Machine: Ooznest Workbee 1500x1500
- Location: Wageningen, Netherlands
- Contact:
Re: Looking for a model
Given the quite organic form of the object I would suggest modelling it with Blender - or Rhino, on second thought. Not my forte, alas (understatement of the year, easily).I bet Steven can do this within a coffee break, but I do not know whether he wants to.
Marcel.
Marcel.
-
- Vectric Craftsman
- Posts: 253
- Joined: Fri May 09, 2014 1:37 pm
- Model of CNC Machine: Laguna IQ
- Location: Pensacola FL
Re: Looking for a model
Something like this?
- Attachments
-
- s curve model.crv3d
- (765 KiB) Downloaded 33 times
Re: Looking for a model
I don't have Aspire so can not open.
Thanks
olf20 / Bob
Thanks
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- sharkcutup
- Vectric Wizard
- Posts: 2928
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: Looking for a model
That is a CRUDE S-Curve Model (Left). One on Right I refined/smoothed out a bit!
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Looking for a model
If you go to Design and Make, look up 'Flourish'..... Lots and lots of S shapes.
Re: Looking for a model
I had been there first, and again just now.
Did not find anything like I posted. Maybe
I've missed it / them.
Thanks for the reply!
olf20 / Bob
Did not find anything like I posted. Maybe
I've missed it / them.
Thanks for the reply!
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Looking for a model
Without any descriptions or type of 3D model, this might work for you. I didn't spent a lot of time on it and it's kind of crude.
https://drive.google.com/file/d/1P_e877 ... sp=sharing
https://drive.google.com/file/d/1P_e877 ... sp=sharing
Steve
-
- Vectric Craftsman
- Posts: 165
- Joined: Sat Apr 02, 2022 6:55 pm
- Model of CNC Machine: LongMill 30x30
Re: Looking for a model
As previously posted, we can make this a fancy S in 3D with Aspire. We do know a little about a lot of stuff. Guessing some of the vectric gurus already did a trace and started tinkering with the Bezier curves in node edit. STL export...
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: Looking for a model
Looks like a couple of guys already made the 3D model. Pretty simple.
Just save the model as STL and send it to the requester.
I can do it, but I am making supper right now.
Tomorrow morning is busy for me.
I can do it later tomorrow afternoon around 5 or 6 EST
Just save the model as STL and send it to the requester.
I can do it, but I am making supper right now.
Tomorrow morning is busy for me.
I can do it later tomorrow afternoon around 5 or 6 EST
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: Looking for a model
I think stevenelson46 model will work.
Thanks Steve, and all the rest that responded.
olf20 / Bob
Thanks Steve, and all the rest that responded.
olf20 / Bob
Heat with corn, Mach3, Bridgeport clone, VcarvePo, Photo VCarve, Craftsman Wood Lathe, Arduino Toys