Felder Post Processor
Felder Post Processor
Hi there, I'm using V-Carve pro to program for a Felder Profit H08 machine with a Format 4 controller. The Format 4 post processor already in V-Carve doesn't quite work and I'm having a lot of trouble getting things going. Is there anyone here that's had this issue and has a workable solution or does anyone know anyone who may be able to edit the processor for me? Let me know, thanks.
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Felder Post Processor
A post processor editing guide is included with the software under HelpPost Processor Editing Guideanyone who may be able to edit the processor for me
The editing itself can be done with any text editor. It sounds far more complicated than it really is.
Make a safe copy of the current post processor so you can always recover.
Make your updates to the post processor file
(Re)Start VCarve and save a toolpath using the updated post processor
Look at the generated toolpath file to examine the results
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 1
- Joined: Wed Aug 24, 2016 5:20 am
- Model of CNC Machine: Felder Profit H08
- Location: Ottawa, Ontario, Canada
- Contact:
Re: Felder Post Processor
Did you manage to find a working post processor for the Felder profit H08?
cheers
cheers
-
- Vectric Craftsman
- Posts: 214
- Joined: Wed Sep 17, 2014 6:53 am
- Model of CNC Machine: Omnitech 4X8 with 8 tool
Re: Felder Post Processor
Hi,
I have Format 4
it is 5X10 Table with 11 Tool changer, and 9 tools at the drill block
please see attached picture for reference and the PP, it is working fine.
but as you know the vcarve PP does not recognize the Drill block.
I hope it works for your machine.
I have Format 4
it is 5X10 Table with 11 Tool changer, and 9 tools at the drill block
please see attached picture for reference and the PP, it is working fine.
but as you know the vcarve PP does not recognize the Drill block.
I hope it works for your machine.
- Attachments
-
- Format4 12D ATC Arcs (mm) (.tcn).txt
- (7.34 KiB) Downloaded 44 times