I need some help
I have a project to make 121 letters with 5/8” Supper Refined MDF.
They are asking to use three different MADE EVOLV SAN fonts which I downloaded and installed onto my computer, and I installed five fonts that I needed out of the ten fonts.
Not all the five are showing up in Vcarve. Is there a way to have all five fonts show up in Vcarve?
I have installed
The fonts are open type not true type..
Thanks
Mark Roberson
When we build, let us think
we build forever. Let
it not be for present delight nor
for present use alone. Let it be
such work as our descendants
will thank us for; and let us
think, as we lay stone on stone
that a is to come when
those stones will be held sacred
because our hands have touched
them, and that men will say, as
they look upon the labor and
wrought substance of them, See!
This our fathers did for us.”
John Ruskin
Need help with fonts
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Need help with fonts
The bold version is often accessed by using the bold checkbox and doesn't show as a separate font.
-
- Posts: 5
- Joined: Tue Jun 07, 2016 2:33 am
- Model of CNC Machine: Shop Sabre 23
- Location: Fort Worth Texas
Re: Need help with fonts
I tried checking the box. that did not seem to have any effect on the letters.
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Need help with fonts
I can only suggest trying to install it again, doubt it's something just to do with the vectric software if the others are all displaying OK. Do you have any other software you could try to see if it has installed OK?
I use a lot of open type fonts & have never had a problem using them.
I use a lot of open type fonts & have never had a problem using them.
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Need help with fonts
Which font did you select? Bold works for me if I select the MADE Evolve Sans font. It won't do anything on the light or medium as I would expect.
-
- Posts: 5
- Joined: Tue Jun 07, 2016 2:33 am
- Model of CNC Machine: Shop Sabre 23
- Location: Fort Worth Texas
Re: Need help with fonts
That did work with the Made Evolve Sans.
I think I tried the bold check on all but that one.
Thank you very much.
I think I tried the bold check on all but that one.
Thank you very much.
-
- Posts: 5
- Joined: Tue Jun 07, 2016 2:33 am
- Model of CNC Machine: Shop Sabre 23
- Location: Fort Worth Texas
Re: Need help with fonts
Thanks to Adrian I have the bold working now. I need the lite to work to work to start the project.
I have installed and uninstalled four time and even restarted the computer.
All of the fonts are not showing up in other programs(MS word, Adobe)
I do not think it is a Vectric issue. I think Vectric is a great software!!!
I have the question into the designers or the fonts, FontSpring. Lets see if they can help.
I have installed and uninstalled four time and even restarted the computer.
All of the fonts are not showing up in other programs(MS word, Adobe)
I do not think it is a Vectric issue. I think Vectric is a great software!!!
I have the question into the designers or the fonts, FontSpring. Lets see if they can help.