I just upgraded to V11 and cant get my tool data to come over. What am I doing wrong? I take my V10 tool data file tools.vtdb and place it in the application data folder in V11 but my tools don't show up??? Any suggestions?
Thanks,
Steve
Copy V10 Tool Data To V11
-
- Vectric Craftsman
- Posts: 200
- Joined: Sat May 16, 2020 4:32 pm
- Model of CNC Machine: Next Wave Piranha XL
- Location: Wadsworth, Ohio
- Contact:
Copy V10 Tool Data To V11
Steve Harp
Wadsworth, Ohio USA
www.trlw.us
Wadsworth, Ohio USA
www.trlw.us
- adze_cnc
- Vectric Wizard
- Posts: 4373
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Copy V10 Tool Data To V11
With changes to the tool database I doubt if you can just copy it over and have it work.
When installing the upgrade did it ask to migrate the took database over? If so this might be of use: https://forum.vectric.com/viewtopic.ph ... 79#p276779
When installing the upgrade did it ask to migrate the took database over? If so this might be of use: https://forum.vectric.com/viewtopic.ph ... 79#p276779
-
- Vectric Craftsman
- Posts: 200
- Joined: Sat May 16, 2020 4:32 pm
- Model of CNC Machine: Next Wave Piranha XL
- Location: Wadsworth, Ohio
- Contact:
Re: Copy V10 Tool Data To V11
Well... Don't know what I did but now its working. Thanks for the help
Steve
Steve
Steve Harp
Wadsworth, Ohio USA
www.trlw.us
Wadsworth, Ohio USA
www.trlw.us
- martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Copy V10 Tool Data To V11
Good to hear that it is working OK now but you would have been better migrating from a previous version rather than moving it, that way a lot of other things you may have done within the previous version will be transfered as well, if you click on the help tab at top of screen it is on the drop down listLuvtocarve wrote: ↑Wed Jul 28, 2021 1:16 amWell... Don't know what I did but now its working. Thanks for the help
Steve