These bases will also have components and wiring to light the sculptures with
LED lights. Everything was great when I did a series of bases sloped at 45 degrees
using the molding toolpath. the bottoms were pocketed out and the fluting toolpath
was used to create a matching slope for the dimmer switch to mount, and a channel
for the charger. A depth of 1 inch and a ramp length of 1 inch yielded the 45 degree
matching slope.
My problem is now he would like some 50 and 60 degree slopes. When I adjust for the
ramp length I am not getting correct results. I need the 1 inch of depth to fit the dimmer switch.
I know I'm missing something really simple but brain fog has set in.
