Shoe Horn

[potl]

Hi
Have watched the video about making a shoehorn on cnc and wonder if anyone can help me set up a toolpath for this?

[Adrian]

Do you mean the New Brit Workshop one?

The toolpaths are in the files already. You just need to adjust the feed rates for your machine.

[potl]

it it just for one side toolpaths, i wounder if i coud use a 2 sided jobb for this?

[Adrian]

The full CNC cut file is two sided with toolpaths but for some reason they've done that one file as an Aspire (CRV3D) file rather than VCarve (CRV) as all the other files in the project are which is probably why you haven't seen it.

Not sure why they did it like that as it should work as a VCarve job as well.

[sharkcutup]

I do not have ASPIRE so I made my own adjustments so that I could make one from V-Carve PRO which I own!

I created my own model (basic shape) from the .dxf files supplied then added a slight dish to the foot heal portion in my two-sided project file. I also used the moulding toolpath to add a slight curvature to the backside too!

Sharkcutup

[potl]

it looks great ,i also have the vcarve pro . Do you want to share your setup for this shoe horn ?

[rscrawford]

Here's my version of a shoehorn made on the CNC.

https://www.youtube.com/watch?v=kqNz2VvSRu0

[SteveNelson46]

Here's my version of a shoehorn made on the CNC.

https://www.youtube.com/watch?v=kqNz2VvSRu0

Very clever indeed, Russ.

[potl]

Is there anyone that have the 2 sided jobb toolpatch for vcarve pro and not just for the aspire??
someone with aspire that can save it like a vcarvepro file and share it with me?