Hi ,
i use Vcarve pro too my Cnc ,
How can i easy do a pattern like that on the Owls body
what bit do i use and a easy way too transfer the pattern too the body ?
How can i do this looking on my CNC
How can i do this looking on my CNC
- Attachments
-
- OWBH 08-Body.DXF
- (28.72 KiB) Downloaded 41 times
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: How can i do this looking on my CNC
Working With Imported Vectors Guide - Vector Drawing https://www.vectric.com/support/tutoria ... or_Drawing
- sharkcutup
- Vectric Wizard
- Posts: 2928
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: How can i do this looking on my CNC
If you are referring to the body texture, it would be a complicated task without some type of pattern generator. It could be vector drawn but would be very time consuming. From the image you have provided it looks as if someone has the knack for using a Dremel tool along on a surface material such as cedar fence board which already has some textured appearance.
I have been on this forum since 2016 and have rarely seen anyone requiring textured surfaces. You could do a search here on the forum.
Sharkcutup
I have been on this forum since 2016 and have rarely seen anyone requiring textured surfaces. You could do a search here on the forum.
Sharkcutup
Last edited by sharkcutup on Thu May 27, 2021 4:58 pm, edited 1 time in total.
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
- Leo
- Vectric Wizard
- Posts: 4092
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: How can i do this looking on my CNC
A Simple EASY way. Nah, I know nothing about that! BUT - I do believe where there is a will, there is a WAY.
I only spent a couple of minutes to test it - but you CAN use the distort tool and distort textures. With that you can choose a texture that is close to what you are looking for. I do not think just one shot at it will work. In my mind I can see many slices of textures all shaped to the owl.
Not simple - not easy - but it is a possibility.
I only spent a couple of minutes to test it - but you CAN use the distort tool and distort textures. With that you can choose a texture that is close to what you are looking for. I do not think just one shot at it will work. In my mind I can see many slices of textures all shaped to the owl.
Not simple - not easy - but it is a possibility.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC