Major Issue for me with 10.506
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Major Issue for me with 10.506
I installed the patch and some of the tool paths I generated are resetting the spindle speed to 0 on a G3 command. I check the post processor and it was using the variable [P] in the post processor. I had to change it to [S] to restore normal operation. It was working in 10.505 correctly with the old setting.
Gary Mitchell
Kentucky, USA
Kentucky, USA
-
- Vectric Wizard
- Posts: 862
- Joined: Wed Aug 16, 2006 7:34 pm
- Model of CNC Machine: shopbot 48x48 upgraded prt
- Location: Monessen, Pa
- Contact:
Re: Major Issue for me with 10.506
The patch to 10.506 is relatively to resolve some small issues with some post processors. If you don't have those issues stay with the 10.505, Let vectric know of the problem you have and maybe the fix will be in the next patch
Bob
Bob
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Major Issue for me with 10.506
I sent support an email and we'll see. Being I have a workaround running I'm going to run my paying jobs and look at it later tonight.
Gary Mitchell
Kentucky, USA
Kentucky, USA
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Major Issue for me with 10.506
I sent a test file to Vectric support but thought you'd guys would like to see it too. Simply save the toolpath using the out of box Grbl Inch post processor and look at the first G3 command. At the end of the line you'll see "S0" (speed zero). And the CNC faithfully turns the spindle off.
- Attachments
-
- Test Bug.crv
- (147 KiB) Downloaded 69 times
Gary Mitchell
Kentucky, USA
Kentucky, USA
-
- Vectric Craftsman
- Posts: 140
- Joined: Fri Dec 07, 2018 4:11 pm
- Model of CNC Machine: CWI Professor 2.2
- Location: Winnipeg MB, Canada
Re: Major Issue for me with 10.506
Version 10.506 allows you to run Vcarve on Windows XP
-
- Posts: 1
- Joined: Sun Dec 10, 2017 4:03 pm
- Model of CNC Machine: Handibot V2
Re: Major Issue for me with 10.506
I am seeing a similar issue, but the S0 appears on the first G1 command:
Now to figure out how to fix, I see the [P] used on several commands:
- G1Z2.381S0F508.0
Now to figure out how to fix, I see the [P] used on several commands:
- FIRST_FEED_MOVE
- FEED_MOVE
- FIRST_CW_ARC_MOVE
- FIRST_CCW_ARC_MOVE
- JET_TOOL_ON
- JET_TOOL_POWER
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Major Issue for me with 10.506
Vectric support confirmed the issue and forwarded it to development. I hope they'll have a fix soon.
Reference Issue 152595
I was lucky to have an eye on the machine or it could have resulted in damage if it kept going
Reference Issue 152595
I was lucky to have an eye on the machine or it could have resulted in damage if it kept going
Gary Mitchell
Kentucky, USA
Kentucky, USA
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Major Issue for me with 10.506
Vectric emailed me today and said they fixed it and it'll be in 10.507
Gary Mitchell
Kentucky, USA
Kentucky, USA
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Major Issue for me with 10.506
I just downloaded 10.507 and ran several test cases though it and it looks like the issue is fully resolved.
Thank You to the Vectric team for their quick and professional actions. Nice Job.
Thank You to the Vectric team for their quick and professional actions. Nice Job.
Gary Mitchell
Kentucky, USA
Kentucky, USA
Re: Major Issue for me with 10.506
And BTW - like 10.506 - if you use MalwareBytes, you have to turn it off before you can install 10.507 successfully .(unlike previous update patches 10.505 and all earlier versions)
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Major Issue for me with 10.506
I don't use MalwareBytes but does it not have the option to allow you to add programs that are safe so you don't have to turn it off each time? Most of the software for antivirus/malware that I have seen has the option to allow you to make changes.
Re: Major Issue for me with 10.506
Does vectric's know the grbl G-Code hasn't worked correctly since the 505 update I've had to go back copy and paste older version of grbl for each update would like to see this addressed if it hasn't already been, thank you
-
- Vectric Wizard
- Posts: 457
- Joined: Tue Sep 04, 2018 2:49 pm
- Model of CNC Machine: Shapeoko 3 XL
Re: Major Issue for me with 10.506
10.507 has a small issue in it. When I try setting the number Laser passes to 2; the second pass is run with the laser turned off. I documented it and sent the crv and gcode off to support. In the meantime I just set the passed to 1 and just run it again. I've tested it using the out of box Shapeoko Inch pp (not my normal pp but I fall back to it to make testing easier for Vectric).
Gary Mitchell
Kentucky, USA
Kentucky, USA