VCarve 10.5 is OUT NOW!
Re: VCarve 10.5 is OUT NOW!
yes it was a pocket toolpath. I sent emailed file
thanks
thanks
-
- Posts: 11
- Joined: Mon Jul 25, 2011 10:12 pm
- Model of CNC Machine: Gantry-type bench Mill
- Location: Melbourne, Australia
Re: VCarve 10.5 is OUT NOW!
Once installed, I get this message when I click on finished and try to launch the new v10.5 install....
I'm not sure where to go from here....
Any ideas?
Thanks, Peter
I'm not sure where to go from here....
Any ideas?
Thanks, Peter
Re: VCarve 10.5 is OUT NOW!
This issue is related to Windows XP. We are working on fixing it - when we're done we will release a patch.
Greg K
Re: VCarve 10.5 is OUT NOW!
The patch 10.503 that fixes issue with start depth in pocketing toolpath among the other things is now available to download.
Greg K
Greg K
Re: VCarve 10.5 is OUT NOW!
Sorry I thought my issue was with v10.5. I never had this issue before and when I used v10 yesterday everything was fine. When i try today I am now having problem with v10 also. It is with a pocketing toolpath and it either doesn't show toolpath for all selected or freezes up while calculating. I have successfully run this job a few time other than a custom name change on bottom of sign. The name toolpath is seperate from the one I'm having problems with. Any suggestions
- Adrian
- Vectric Archimage
- Posts: 14683
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: VCarve 10.5 is OUT NOW!
Try the Vector Validator tool to see if there are any issues with the vectors as part of the name change. Other than that you're probably going to have to post the file here or send it to support so it can be looked at.bs893 wrote: ↑Thu Jul 09, 2020 5:27 pmSorry I thought my issue was with v10.5. I never had this issue before and when I used v10 yesterday everything was fine. When i try today I am now having problem with v10 also. It is with a pocketing toolpath and it either doesn't show toolpath for all selected or freezes up while calculating. I have successfully run this job a few time other than a custom name change on bottom of sign. The name toolpath is seperate from the one I'm having problems with. Any suggestions
Re: VCarve 10.5 is OUT NOW!
THANKS!!! That worked. For some reason though any change I make, even if it isn't with that toolpath, I have to revalidate the vectors. Not sure why it would work sometimes but not others. But I'm glad I can get it to work everytime now.
Last edited by bs893 on Thu Jul 09, 2020 6:29 pm, edited 1 time in total.
- Adrian
- Vectric Archimage
- Posts: 14683
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: VCarve 10.5 is OUT NOW!
Are you using the text tool to make the changes? The issues might be with the font itself if you are. Some fonts are really messy as far as CNC work is concerned but look great to the eye.
Re: VCarve 10.5 is OUT NOW!
I am using text tool but that portion comes out correct. I'm using a simple text that I've used on over 50 signs now of the same size. My issue is with a school logo that sits above the text. I've not had this problem before but at least I can get past it now.
thanks again
thanks again
Re: VCarve 10.5 is OUT NOW!
I updated and installed 10.503. I am using an Optlaser 6w laser and it worked fine before the upgrade. Now when I try to find it with the postprocessor it is not there. I am currently not able to make my laser work with any of my old saved files.
Randy W Benetti, Sr.
KG7TIF
KG7TIF
Re: VCarve 10.5 is OUT NOW!
Post processor no longer listed after upgrade to 10.502
always used CNCShark-USB ARCS (inch)(*.tap) what am i supposed to use now???
always used CNCShark-USB ARCS (inch)(*.tap) what am i supposed to use now???
Re: VCarve 10.5 is OUT NOW!
I have a project with 2 tool paths using the same tool. When I save the tool path, only one of them is saved. I have to save each one separately in order to run both. Worked fine in 10.0, not working in 10.5
Thanks
Sheldon
Thanks
Sheldon
- Adrian
- Vectric Archimage
- Posts: 14683
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: VCarve 10.5 is OUT NOW!
Make sure you have "Visible toolpaths to one file" checked at the top of the Save Toolpaths form.
Re: VCarve 10.5 is OUT NOW!
That didn’t work at all. I also tried the (metric) one and neither one produces a postscripted G code file that works. Now I am stuck with loading Ver 10.022 in order to make it work at all. Also my tool library won’t transfer over and I have tried that numerous times. Not so happy with the 10.5 “downgrade” at this point.
Randy W Benetti, Sr.
KG7TIF
KG7TIF