Hello all.
If you do a final carve for 3d can you get it to raster in the y Axis?
Raster in y Axis
-
Vsantonartino
- Posts: 11
- Joined: Wed Aug 21, 2019 2:13 pm
- Model of CNC Machine: Piranha fx
-
scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Raster in y Axis
On the Finish toolpath, after you select raster....try the typical 90,180,270 degrees under Raster Angle.
Depend on how you want to cut it and your machine.
scott
Depend on how you want to cut it and your machine.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Raster in y Axis
As Scott has said if you want to change how the raster is carved then you need to change the raster angleVsantonartino wrote:Hello all.
If you do a final carve for 3d can you get it to raster in the y Axis?
