Raster in y Axis

This forum is for general discussion regarding VCarve Pro
Post Reply
Vsantonartino
Posts: 10
Joined: Wed Aug 21, 2019 2:13 pm
Model of CNC Machine: Piranha fx

Raster in y Axis

Post by Vsantonartino »

Hello all.

If you do a final carve for 3d can you get it to raster in the y Axis?

User avatar
scottp55
Vectric Wizard
Posts: 3681
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: Raster in y Axis

Post by scottp55 »

On the Finish toolpath, after you select raster....try the typical 90,180,270 degrees under Raster Angle.
Depend on how you want to cut it and your machine.
scott
scott

User avatar
martin54
Vectric Wizard
Posts: 4870
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber System 48,Denford Triac Modified
Location: Crossgates, Scotland

Re: Raster in y Axis

Post by martin54 »

Vsantonartino wrote:Hello all.

If you do a final carve for 3d can you get it to raster in the y Axis?
As Scott has said if you want to change how the raster is carved then you need to change the raster angle :lol: :lol:

Post Reply