VCarve Desktop & Pro Version 10 are available now!
- fretsman68
- Vectric Wizard
- Posts: 1084
- Joined: Tue Sep 02, 2008 7:16 pm
- Location: Pa. USA
Re: VCarve Desktop & Pro Version 10 are available now!
Quick question, if we decide not to upgrade, how do we turn off the update message in the upper right hand corner of the program?
--------------
Dave
Dave
-
- Posts: 2
- Joined: Fri Jul 28, 2017 5:51 am
- Model of CNC Machine: Shapeoko3
Re: VCarve Desktop & Pro Version 10 are available now!
Thanks guys. That did it. I rescind my suggestion of a bug.... With that said, perhaps Vectric should add "Hey Scott! Don't forget to check the simulation quality" to the user manual.... Or am I just nitpicking?
-
- Vectric Staff
- Posts: 539
- Joined: Wed Jul 19, 2017 11:59 am
- Model of CNC Machine: Craft CNC DS1
Re: VCarve Desktop & Pro Version 10 are available now!
Sorry, I'm afraid there isn't an option to turn that off currently.fretsman68 wrote:Quick question, if we decide not to upgrade, how do we turn off the update message in the upper right hand corner of the program?
--------------
Mohamed
++++++++
Mohamed
++++++++
Re: VCarve Desktop & Pro Version 10 are available now!
I am trying to install VCP10, it keeps hanging up, I have Win10Pro. Here is where is stops the install...
- fretsman68
- Vectric Wizard
- Posts: 1084
- Joined: Tue Sep 02, 2008 7:16 pm
- Location: Pa. USA
Re: VCarve Desktop & Pro Version 10 are available now!
Thank you. Any word when those explanation emails will be sent out for the people who have to pay for the upgrade or not?mohamed wrote:Sorry, I'm afraid there isn't an option to turn that off currently.fretsman68 wrote:Quick question, if we decide not to upgrade, how do we turn off the update message in the upper right hand corner of the program?
--------------
Dave
Dave
Re: VCarve Desktop & Pro Version 10 are available now!
Hi fretsman
You should have received the emails now. If not then the explanation is unfortunately painfully simple. The emails were sent in batches and for that batch the template that was used was incorrect. It was an honest mistake, and after a year of incredibly hard work by everyone here on the release, it was immensely frustrating for us that something we're very proud of has been tainted for a few people. I'm also sure that for some people who received those emails it was quite disappointing too, and perhaps they feel like it was some form of trick. It was not. We try to be really generous with our upgrade policy, giving away a guarantee of free upgrades for a year on new purchases, and not forcing people to upgrade by making the next upgrade eye-wateringly expensive if you happen to not want what's in a particular release.
So once again, we are really sorry to have caused confusion. If you think you are entitled to the upgrade because you either purchased the software in the last 12 months or an upgrade in the last 3 months then send us in a message to our support team and we'll investigate as soon as possible. If you do decide to upgrade I hope you enjoy all of the new features
Adam
You should have received the emails now. If not then the explanation is unfortunately painfully simple. The emails were sent in batches and for that batch the template that was used was incorrect. It was an honest mistake, and after a year of incredibly hard work by everyone here on the release, it was immensely frustrating for us that something we're very proud of has been tainted for a few people. I'm also sure that for some people who received those emails it was quite disappointing too, and perhaps they feel like it was some form of trick. It was not. We try to be really generous with our upgrade policy, giving away a guarantee of free upgrades for a year on new purchases, and not forcing people to upgrade by making the next upgrade eye-wateringly expensive if you happen to not want what's in a particular release.
So once again, we are really sorry to have caused confusion. If you think you are entitled to the upgrade because you either purchased the software in the last 12 months or an upgrade in the last 3 months then send us in a message to our support team and we'll investigate as soon as possible. If you do decide to upgrade I hope you enjoy all of the new features
Adam
- fretsman68
- Vectric Wizard
- Posts: 1084
- Joined: Tue Sep 02, 2008 7:16 pm
- Location: Pa. USA
Re: VCarve Desktop & Pro Version 10 are available now!
Thanks for the information, Adam, but I never received the second email so that was why I simply asked. Hopefully my question didn't seem like a "slam", it was just a an honest question.AdamJ wrote:Hi fretsman
You should have received the emails now. If not then the explanation is unfortunately painfully simple. The emails were sent in batches and for that batch the template that was used was incorrect. It was an honest mistake, and after a year of incredibly hard work by everyone here on the release, it was immensely frustrating for us that something we're very proud of has been tainted for a few people. I'm also sure that for some people who received those emails it was quite disappointing too, and perhaps they feel like it was some form of trick. It was not. We try to be really generous with our upgrade policy, giving away a guarantee of free upgrades for a year on new purchases, and not forcing people to upgrade by making the next upgrade eye-wateringly expensive if you happen to not want what's in a particular release.
So once again, we are really sorry to have caused confusion. If you think you are entitled to the upgrade because you either purchased the software in the last 12 months or an upgrade in the last 3 months then send us in a message to our support team and we'll investigate as soon as possible. If you do decide to upgrade I hope you enjoy all of the new features
Adam
--------------
Dave
Dave
Re: VCarve Desktop & Pro Version 10 are available now!
Hi fretsman,
Thanks for your response. I believe they've all be sent now. If you send your details into support we can certainly check for you.
Cheers
Adam
Thanks for your response. I believe they've all be sent now. If you send your details into support we can certainly check for you.
Cheers
Adam
- fretsman68
- Vectric Wizard
- Posts: 1084
- Joined: Tue Sep 02, 2008 7:16 pm
- Location: Pa. USA
Re: VCarve Desktop & Pro Version 10 are available now!
No worries, I already paid for the upgrade, but thank you-AdamJ wrote:Hi fretsman,
Thanks for your response. I believe they've all be sent now. If you send your details into support we can certainly check for you.
Cheers
Adam
--------------
Dave
Dave
-
- Posts: 34
- Joined: Fri Feb 08, 2019 1:52 pm
- Model of CNC Machine: Shark HD4 Extended with VCarve Pro 10.5
Re: VCarve Desktop & Pro Version 10 are available now!
I have upgraded to 10 but did not see where I needed to choose a Clipart package from Design and Make. Can I still get this?
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: VCarve Desktop & Pro Version 10 are available now!
Login to your Vectric Portal, it should be just above or below the V10 is here logo.
If not you might try contacting support at support@vectric.com
If not you might try contacting support at support@vectric.com
John
Maker of Chips
Maker of Chips
-
- Posts: 34
- Joined: Fri Feb 08, 2019 1:52 pm
- Model of CNC Machine: Shark HD4 Extended with VCarve Pro 10.5
Re: VCarve Desktop & Pro Version 10 are available now!
Thankshighpockets wrote:Login to your Vectric Portal, it should be just above or below the V10 is here logo.
If not you might try contacting support at support@vectric.com
I see the link but when I click on it all I get is the little thing going around like it thinking. I'll try again tomorrow.
-
- Posts: 34
- Joined: Fri Feb 08, 2019 1:52 pm
- Model of CNC Machine: Shark HD4 Extended with VCarve Pro 10.5
Re: VCarve Desktop & Pro Version 10 are available now!
OK I finally got it to load up.
Re: VCarve Desktop & Pro Version 10 are available now!
I just upgraded my Vectric Desktop to version. I selected my free Design and Make model package but I have been unable to retrieve or find out where it exists. Any help would be appreciated. Apparently I do need help!
Thanks, Gerry
Thanks, Gerry
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: VCarve Desktop & Pro Version 10 are available now!
Hey Gerry,
Mine took a day before it showed up in my Portal.
scott
Mine took a day before it showed up in my Portal.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.