Ucnc. To be or not to be?

[pal]

Help, my Vcarve V6 has no P.P. for uccnc AM I UP THE CREEK?

[IslaWW]

Ask your question on the UCCNC forum. Someone there should have one

[martin54]

There are probably better options but I have used the usbcnc post processor without problem, in fact when I first used it I was sure it said uccnc not usbcnc
As Gary says they have a forum so ask there for a better option.

[ger21]

The Mach3 post should work fine.
I'll try to find the time to write a UCCNC post this weekend, and I'll put it on my website.

[pal]

Thank you all for your help. I was a mach3 user running through a UC100. My computer died, the new one has Windows 10 not the old 7 so I am migrating to UCCNC with my old
UC100 together with my old Vcarve Pro V6.
So just hoping there is a compatible P.P. On V6. Thanks. Peter.

[pal]

P.s to my last post. I will try the Mach3 Pp as soon as I can get back to my machine. Thanks.

[mikeacg]

Gerry,

Check your URL! It comes up on a search page. Are you at www.thecncwoodworker.com?

Mike

[ger21]

I have both domains.
cncwoodworker redirects to thecncwoodworker.

[Mark's Wood Chips]

Mach3 PP works perfectly with UCCNC.

[ger21]

Just be sure to configure UCCNC to Ignore unknown g-codes.

[pal]

Thank you all for your time and responses. Regards. Peter.

[ger21]

I did throw some UCCNC posts together the other night. I'll get them on my website tonight.

[ger21]

Two weeks later, I finally uploaded the posts.

http://www.thecncwoodworker.com/uccnc.html

[martin54]

Two weeks later, I finally uploaded the posts.

http://www.thecncwoodworker.com/uccnc.html

OK so I know absolutely nothing about post processors, all I know is that the mach pp, the usbcnc pp & a couple of others all seem to work with UCCNC so how are these you have kindly done different ger21 ? (without getting to technical )