We’re coming to DENVER! Save the date & book your place!
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: We’re coming to DENVER! Save the date & book your place!
There is light rail downtown, too. I know one of the stops is at the Colorado Convention Center, which is just across 14th street from Embassy Suites. I don't get down there enough to know which trains go where, but it should get you lots closer to the hotel.
Chris
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: We’re coming to DENVER! Save the date & book your place!
I ended up taking the free "Mall Bus" from Union Station to the intersection of Stout St and 16th Street. I just had to take a very short walk to 1420 Stout
to the hotel. Already checked in!
to the hotel. Already checked in!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: We’re coming to DENVER! Save the date & book your place!
Checked in this afternoon....
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: We’re coming to DENVER! Save the date & book your place!
Save some happy hour for us, the two of us should ski in about mid day tomorrow.
- newmexico
- Vectric Craftsman
- Posts: 142
- Joined: Thu Dec 10, 2015 1:31 pm
- Model of CNC Machine: Shopbot
- Location: New Mexico
- Contact:
Re: We’re coming to DENVER! Save the date & book your place!
Not sure if Denver can survive with all those "Vectric Wizards" in town.
Hooo-boy!
Hooo-boy!
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: We’re coming to DENVER! Save the date & book your place!
6'3", 300lbs, black shirt, blue jeans, gray surgical boot on my Left foot. Find me and take me to the lounge.
I should be there around 3:30 today.
Chris
I should be there around 3:30 today.
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: We’re coming to DENVER! Save the date & book your place!
yeah but you are closer than me. the webcams do show snow out on the roadways. see everyone at happy hour
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: We’re coming to DENVER! Save the date & book your place!
It's been snowing all morning, it's starting to stick pretty good. Be careful out there.
If anyone wants to find me, I'm 6'4", white beard, white shirt, bluejeans and in my straw cowboy hat.
If anyone wants to find me, I'm 6'4", white beard, white shirt, bluejeans and in my straw cowboy hat.
John
Maker of Chips
Maker of Chips
Re: We’re coming to DENVER! Save the date & book your place!
That storm was suppose to hit us in Salt Lake, but went to Denver instead, but it's will only 35°F today. I'm ready to head to Phoenix, where it's in the 90's. My old bones is allergic to the cold. Stay safe.
Gary
Gary
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: We’re coming to DENVER! Save the date & book your place!
Boarding now in sunny San Jose bound for Denver via Salt Lake City
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Vectric Wizard
- Posts: 724
- Joined: Sun Jun 16, 2013 4:40 am
- Model of CNC Machine: Home Built 4-axis Router
- Location: Fort Collins, CO
Re: We’re coming to DENVER! Save the date & book your place!
Sitting here in a motorhome at the outskirts of Denver. It was probably a good idea to fill the propane tank last night: the furnace was running all the time and 22 degrees in the morning. But at least I can take the bus to the convention center (only $1.50 for seniors ) and save the absurd parking fees downtown.
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: We’re coming to DENVER! Save the date & book your place!
Getting ready for a full day
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Pickled06
- Posts: 11
- Joined: Fri Sep 06, 2019 6:51 pm
- Model of CNC Machine: Avid CNC / CNC Router Parts PRO4848
Re: We’re coming to DENVER! Save the date & book your place!
I was looking for name tags/badges, but didn’t see any. Here’s my submission - the laser job could have been better.
Carlo
-
- Vectric Staff
- Posts: 566
- Joined: Thu Jan 12, 2017 3:05 pm
- Model of CNC Machine: xxx
Re: We’re coming to DENVER! Save the date & book your place!
...And just like that day 1 of our User Group Meeting in Denver was over!
Today we have all seen and learned so much.
Thank you so much to all of our wonderful attendees it is truly a pleasure for us to meet you all.
We're looking forward to doing it all over again tomorrow! Here are some pictures of the event so far...
Today we have all seen and learned so much.
Thank you so much to all of our wonderful attendees it is truly a pleasure for us to meet you all.
We're looking forward to doing it all over again tomorrow! Here are some pictures of the event so far...
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: We’re coming to DENVER! Save the date & book your place!
Look harder, I've counted 5, 6 including yours now....Pickled06 wrote:I was looking for name tags/badges, but didn’t see any. Here’s my submission - the laser job could have been better.
Here's our's, look for us tomorrow....
John
Maker of Chips
Maker of Chips