This forum is for general discussion regarding VCarve Pro
Burchtree
Vectric Wizard
Posts: 977 Joined: Wed Aug 31, 2005 12:26 am
Location: Upper Michigan
Post
by Burchtree » Sat Nov 03, 2007 1:57 am
I t would be cool to have maps showing where the users are
Dan
Randy
Vectric Apprentice
Posts: 62 Joined: Tue Jul 18, 2006 5:31 pm
Location: Garland, Texas USA
Post
by Randy » Sat Nov 03, 2007 2:04 am
Garland, Texas
Northeast corner of Dallas.
Slowly I turned...
Randy
cleenrmn
Vectric Apprentice
Posts: 85 Joined: Wed Mar 21, 2007 5:00 am
Location: Tulare, California
Post
by cleenrmn » Sat Nov 03, 2007 3:25 am
hi all im in tulare california in the central
valley half way between fresno and bakersfield
signsbyjay
Posts: 32 Joined: Tue Mar 20, 2007 2:55 am
Model of CNC Machine: Shop Bot
Location: Highland Il.
Post
by signsbyjay » Sat Nov 03, 2007 3:41 am
Tulsa, Ok.
Just bought the software and still learning
larrybadgett
Vectric Wizard
Posts: 457 Joined: Fri Oct 20, 2006 1:21 pm
Model of CNC Machine: ShopSabre
Location: Corning, Iowa USA
Contact:
Post
by larrybadgett » Sat Nov 03, 2007 10:53 am
Down in the southwest corner.
larrybadgett
Vectric Wizard
Posts: 457 Joined: Fri Oct 20, 2006 1:21 pm
Model of CNC Machine: ShopSabre
Location: Corning, Iowa USA
Contact:
Post
by larrybadgett » Sat Nov 03, 2007 11:08 am
Corning, Iowa
Down in the southwest corner.
CRFultz
Vectric Wizard
Posts: 1160 Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas
Post
by CRFultz » Sat Nov 03, 2007 11:30 am
Longview, Texas
John S
Vectric Craftsman
Posts: 224 Joined: Wed Oct 26, 2005 2:02 am
Location: Nottingham, England
Post
by John S » Sat Nov 03, 2007 12:26 pm
Just down the road from Tony and Brian, that's why I get the best service
John S.
Frank_74
Vectric Craftsman
Posts: 125 Joined: Wed Oct 17, 2007 11:44 pm
Location: Germany
Contact:
Post
by Frank_74 » Sat Nov 03, 2007 1:07 pm
Hello,
I live in
Aachen, NRW, Germany, Europe, Earth, .....
Bye, Frank
mrBOND
Vectric Craftsman
Posts: 105 Joined: Sat Aug 19, 2006 12:12 pm
Location: Sweden
Contact:
Post
by mrBOND » Sat Nov 03, 2007 1:34 pm
South Sweden
CNC 1000x600 | VCarve Pro 5.5 | PhotoVCarve | Cut3D | Summa Vinyl Cutter | FlexiSign
juan
Vectric Apprentice
Posts: 93 Joined: Tue Aug 15, 2006 10:55 am
Location: The Netherlands
Contact:
Post
by juan » Sat Nov 03, 2007 2:03 pm
Volendam near Amsterdam the Netherlands
lockeyone
Vectric Craftsman
Posts: 147 Joined: Thu Dec 07, 2006 4:45 am
Model of CNC Machine: other software 50-50 router, Mach3, Epilog 60W
Location: Schofield, Wisconsin, USA
Contact:
Post
by lockeyone » Sat Nov 03, 2007 2:25 pm
I just updated a map I have on Google maps showing most of the places I shipped machinist level boxes I make on my machine. It was pretty easy and fast. If someone wishes to take some time this could work out, check it out.
my link
Schofield, Wisconsin
If you want to kill time, why not work it to death!
den73160
Posts: 32 Joined: Tue Aug 23, 2005 8:37 pm
Post
by den73160 » Sat Nov 03, 2007 3:18 pm
Oklahoma City Area, Oklahoma
temptat
Posts: 25 Joined: Thu Aug 30, 2007 1:15 am
Location: US of A
Contact:
Post
by temptat » Sat Nov 03, 2007 6:08 pm
Newbie from Benicia, CA outside of San Francisco.
Frank
Courtyard Customs Signs & Designs
Turtle49
Vectric Wizard
Posts: 1496 Joined: Mon Aug 27, 2007 9:11 pm
Model of CNC Machine: 4' EZ-Router and Blurry customs SK25
Location: Holland, MI. U.S.A
Contact:
Post
by Turtle49 » Sat Nov 03, 2007 6:23 pm
Burchtree wrote: It would be cool to have maps showing where the users are
Dan
I don't know if Tony and Brian are interested, but Frappr offers a free map service.
http://www.frappr.com/
The Teardrop trailer site I visit uses this. It's pretty easy.
Tim