I need to email a customer a picture of my V-carve file I'm working on.
Is there any way to change my file to something they can open without V-carve?
Thanks Max
V-carve files to jepg files
-
- Vectric Apprentice
- Posts: 99
- Joined: Sun Sep 24, 2006 7:35 pm
- Location: Lamesa Texas
V-carve files to jepg files
Max
making molds & turningwood in west Texas
making molds & turningwood in west Texas
Max,
From the 3D View screen go to View > Save Shaded Image on the menu bar and choose to save the image as either a *.jpg, *.bmp or *.gif bitmap file from the 'Save as type' drop down menu selection.
That should get you a customer viewable file.
HTH,
From the 3D View screen go to View > Save Shaded Image on the menu bar and choose to save the image as either a *.jpg, *.bmp or *.gif bitmap file from the 'Save as type' drop down menu selection.
That should get you a customer viewable file.
HTH,
HayTay
Don't be the one that stands in the way of your own success!
Don't be the one that stands in the way of your own success!
-
- Vectric Apprentice
- Posts: 99
- Joined: Sun Sep 24, 2006 7:35 pm
- Location: Lamesa Texas
Thanks
Thanks guy's I would have never found without you help.
Have a good one
Max
Have a good one
Max
Max
making molds & turningwood in west Texas
making molds & turningwood in west Texas