buck head

This forum is for general discussion regarding VCarve Pro
coop
Vectric Craftsman
Posts: 102
Joined: Tue Sep 19, 2006 8:53 pm
Model of CNC Machine: K2CNC- 25X25-50X50
Location: Mackinaw City MI
Contact:

buck head

Post by coop »

i really need a "buck" head of any kind,
but if possible a partial side view mabe an 6 to 10 pointer i will be leaving it "raised"
in the design
any help would be appreciated
thanks,
bo

john teichman
Vectric Apprentice
Posts: 81
Joined: Fri May 19, 2006 8:30 pm

Post by john teichman »

see if this helps it came from the form awhile ago.
Attachments
misc.crv
(381 KiB) Downloaded 390 times

CRFultz
Vectric Wizard
Posts: 1160
Joined: Tue Mar 28, 2006 4:21 pm
Location: Longview, Texas

Post by CRFultz »

Here's one that was posted by jerry from maine....
I had it mounted :D
Attachments
deer.eps
(25.9 KiB) Downloaded 250 times
Mounted.jpg

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Post by Jerry In Maine »

coop -

I see you're from Mackinac City, Michigan...

I was a "Yooper" for 4 years. I moved from Sault Ste. Marie, MI two years ago. The Coast Guard had me stationed there before they moved me here to Maine. I enjoyed it - but DANG northern Michigan is COLD.

120" annual snowfall - and it didn't melt between storms either because it never got over freezing. Temps 30 below - moisture in your nose and eyes would freeze instantly when you went outside.

You folks are a hardy bunch. :wink:
I'm just a number in a great design

User avatar
Regnar
Vectric Craftsman
Posts: 100
Joined: Fri Apr 20, 2007 2:22 am
Model of CNC Machine: Mechmate 48"x96"
Location: Mobile, Alabama

Post by Regnar »

Jerry i was wondering if you had any coastie files? I just finished up my machine and will start cutting award boards and plaques for work. Looking for rates, emblems and such.

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Post by Jerry In Maine »

I don't have anything other than what's on http://www.uscg.mil/top/graphics/ranks.asp

The graphics of the rating badges stink though. Same graphics that have been around for 20+ years - and I don't know where any updated stuff is.

Small examples of the various rate symbols can be found in the Uniform Distribution Centers Catalog available from http://www.uscg.mil/hq/g-w/g-wp/udc/UDC_Links.html

You might also sniff around http://www.fredsplace.org/ to see if you can find anything there...if you do please let me know.
I'm just a number in a great design

User avatar
Colin P F
Vectric Craftsman
Posts: 185
Joined: Tue Dec 06, 2005 12:47 am
Location: UK

Post by Colin P F »

:D Jerry, after hearing about you being snowed in so much I understand how you get the time to produce such a selection of graphics.

Cheers,

Colin

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Post by Jerry In Maine »

I'm not snowed in here in Maine as it's not NEARLY as bad as in Michigan...
I have missed a few days from work lately due to being sick - and I get bored, and the next thing you know I'm converting and uploading files.

If I was well enough I'd be kayaking or working on the sailboat I'm building...
I'm just a number in a great design

Bow4IT
Posts: 27
Joined: Tue May 23, 2006 12:25 pm
Location: My own little world....

Post by Bow4IT »

This looks like it might be a nice head...............I hope to let you know in a few months
Attachments
SUNP0003.JPG

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Post by Jerry In Maine »

I'll see your deer head and raise you an entire bear...

This little guy was messing around on my deck the other night.
I'm just a number in a great design

Bow4IT
Posts: 27
Joined: Tue May 23, 2006 12:25 pm
Location: My own little world....

Post by Bow4IT »

Wow.......I thought thae came close to house, but you got me beat.

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Post by Jerry In Maine »

How 'bout these guys?
Pic was taken while I was HANDFEEDING them some sunflower seed.

The bear is a little guy. He robbed my bird feeders on a regular basis until I started bringing them in at night. He makes his rounds each evening - and my deck (off the 2nd floor) is the last stop before he goes back into the woods. He's never caused any trouble and is not agressive - but of couse no one's going to rub his belly or pat his head any time soon :shock:
Attachments
turkey_3.JPG
I'm just a number in a great design

mark296
Vectric Craftsman
Posts: 260
Joined: Tue Jun 13, 2006 3:34 am
Location: Vermont

Post by mark296 »

That happenes everyday up here in Canaan. What part of Maine are you in.

User avatar
Jerry In Maine
Vectric Wizard
Posts: 342
Joined: Tue Jun 26, 2007 2:46 am
Model of CNC Machine: CNC Router Parts CRP4848
Location: Surry, Maine USA

Post by Jerry In Maine »

Mid-Coast. In Ellsworth, Just off Mt. Desert Island and Acadia Nat'l Park. 25 mi from Bangor.
I'm just a number in a great design

mark296
Vectric Craftsman
Posts: 260
Joined: Tue Jun 13, 2006 3:34 am
Location: Vermont

Post by mark296 »

Jerry In Maine wrote:Mid-Coast. In Ellsworth, Just off Mt. Desert Island and Acadia Nat'l Park. 25 mi from Bangor.
That is about 4 hours from here. I am 1 mile from Canada and one mile from NH.

Post Reply